Products

AFCONA 3775 is a leveling agent with very high defoaming effect for solvent-based coatings. AFCONA 3775 is an acrylic polymer tailor made for those applications that need good leveling as well as a high defoaming effect like coil coatings and other foam sensitive systems. It is recommended as a non-silicone leveling agent where silicone is not permitted due to intercoat adhesion problem.

Syntran® 1950C is based on Interpolymer Corporation's unique styrenated acrylic technology. This technology creates a film with a very high gloss and fast dry times. This technology also allows for excellent adhesion over multiple substrate types. This milky dispersion is used in floor finishes, household, label, board, and packaging coatings (OPV).

DeCAL 4286 is a low molecular weight carboxylated acrylic copolymer with the capacity to carry very high levels of pigment and to provide maximum color development properties at these loadings. To obtain the full benefits of DeCAL 4286, it is essential to use the highest possible pigment binder ratios and the highest possible pigment loading.

JetFil® V575C is a high-purity, extremely platy, fine talc product that is beneficiated to maximize stiffness, HDT and  dimensional stability in plastics applications. The particle size distribution and top size of this product are engineered and controlled to provide maximum impact strength and the best balance of stiffness and impact resistance. JetFil® V575C is compacted to enhance compounding throughput and reduce dust generation.

Pangel B40 is a powdered additive with a high thickening and anti-settling capacity for high-polarity systems. It is especially recommended for adding thixotropic, suspension, and sagging resistance properties to systems based on alcohol, glycol, and ketone solvents, as well as mixtures of those solvents with water.

AFCONA 3730 is a leveling agent for solvent-based and solvent-free coatings. AFCONA 3730 is a high molecular weight polyester polymer which offers good leveling properties. It is very compatible with the oil-free polyester resins that are used in can coatings. This means it is very suitable for use as a leveling agent for clearcoats and pigmented coatings, as it will not give haze, orange peel or other side effects to the coating.

AFCONA 3771 is a paint additive classified and labeled according to the CLP regulation. It is an acrylic-modified fluorocarbon, containing carboxylic acid groups to increase the polarity of the polymer, providing excellent compatibility with most common resins used in coatings.

JetFil® H390 is an off-white talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polypropylene applications to achieve maximum stiffness at loading levels as high as 20%, 40%, or higher. It is commonly used in wood-plastic composites (WPC).

Cytron TBC is a non-toxic plasticizer widely used in PVC and cellulose derivatives. It can be applied in food-contact materials, such as plastic wrap, containers, films, or printing inks. It is a safe alternative to plasticizers in children's toys and medical devices, such as tubing, gloves, bandages, and patches. It can also be used as an emollient for personal care products.

AFCONA 2027 is a moderate defoamer with minimal side effects. AFCONA 2027 prevents the formation of foam and blisters during manufacturing and application. It offers a combination of good defoaming and compatibility with most resin systems. It is recommended for medium-viscosity applications applied by spray and brush.

Syntran® PA-1475 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

Pangel OM8 is a rheological additive for low- to medium-polarity systems based upon highly purified bentonite clay. It is particularly recommended for systems based on resins such as polyurethanes, acrylics, polyesters, epoxy esters, and alkyds. Pangel OMD8 is an organobentonite that enhances thixotropic and pseudoplastic effects in systems with intermediate polarity.

AFCONA 5209 is an anionic/cationic wetting and dispersing additive used to improve the wetting of pigment surfaces. AFCONA 5209 is the 100% version of AFCONA 5009. It reduces the interfacial tension between pigments or extenders and the vehicle. It stabilizes the pigments through electrical charge repulsion forces.

Crys-Talc® 4H-4HC is a high-purity, high-brightness, platy, medium-sized talc used in interior and exterior coating, adhesive, and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Crys-Talc® 4H is used in solid-color and semitransparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics. Crys-Talc® 4H has a platy, hydrophobic structure used in  architectural and industrial primers to improve barrier properties which impart corrosion resistance and stain blocking  ability.

MINBLOC® HC 2000 is a unique and distinctive combination of particle morphology, surface chemistry, and refractive index. MINBLOC® HC additives deliver excellent antiblocking performance and superior haze, gloss, and clarity values in packaging-grade flexible films without diminishing critical structural or mechanical properties.

DeCAL 4202 is an acrylic binder ideally suited for use in water-based flexographic inks for paper and corrugated board. It possesses excellent machine stability and resolubility, viscosity/pH stability, favorable viscosity/dilution curves, and excellent pigment wetting characteristics. It is supplied in its neutralized varnish form.

DeCAL 4287 is a low molecular weight carboxylated acrylic copolymer that can carry very high levels of pigment and provide maximum color development properties at these loadings. It is the same polymer as DeCAL 4286 but is supplied as the monoethanolamine salt for use in formulations where slower drying or better resolubility is required.

DeCAL 4288 is a low molecular weight carboxylated acrylic copolymer that can carry very high levels of pigment, providing maximum color development properties at these loadings. To obtain the full benefits, it's essential to use the highest possible pigment binder ratios and the highest possible pigment loading of DeCAL 4288. It's common to prepare a neutralized solution using either ammonia or monoethanolamine in formulations where slower drying or better resolubility is required.

MINBLOC® MC-81 belongs to the MINBLOC® MC series of antiblocking additives that are produced from an inert, naturally occurring alpha quartz with a unique surface morphology. With nearly the same refractive index as the barefoot resins, MINBLOC® MC grades are ideal for PET, LLDE, LDPE, and other clear or opaque resin and film applications.

Syntran® PA-1465 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

JetFil® V700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® V625C is an extremely platy, fine talc product that is beneficiated to maximize stiffness, HDT, and dimensional stability in plastics applications. The particle size distribution and top size of this product are engineered and controlled to provide maximum impact strength and the best balance of stiffness and impact resistance. JetFil® V625C is compacted to enhance compounding throughput and reduce dust generation.

Pangel B42 is an organically modified sepiolite powdered additive with a high thickening and anti-settling capacity for high polarity systems, particularly recommended for systems based on alcohol, glycol and ketone type solvents, as well as in mixtures of those with water.

JetFil® V390 is an extremely platy, coarse talc product that is beneficiated to maximize stiffness, HDT, and dimensional stability in plastics applications. The particle size distribution and top size of this product are engineered and controlled to provide maximum impact strength and the best balance of stiffness/impact resistance.

MINBLOC® HC 500 is a unique and distinctive combination of particle morphology, surface chemistry, and refractive index. MINBLOC® HC additives deliver excellent antiblocking performance and superior haze, gloss, and clarity values in packaging-grade flexible films without diminishing critical structural or mechanical properties.

AFCONA 3755 is a leveling and flow control agent for solvent-based coatings with very effective defoaming properties. It is a pure polyacrylic leveling agent, designed for applications where leveling and defoaming are both important, such as coil and can coatings. It can also be used in other foam-sensitive systems.

AFCONA 5244 is the nearly 100% active solid version of AFCONA 5044, designed for high-solid systems where the presence of solvents must be limited. When used at the same level of active solids, the properties of AFCONA 5244 and AFCONA 5044 are almost identical.

Syntran® PPX 103-08 is a ready-to-use adhesive formulation designed for use in blisterpack or other heatseal/lamination applications. It is based on a proprietary hybrid acrylic technology. This technology combines multiple polymer types into a single polymer network to improve gloss, adhesion, and peel strength over multiple substrates.

JetFil® H590 is an off-white talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polypropylene applications to achieve maximum stiffness at loading levels as high as 20%, 40%, or higher. It is commonly used in wood-plastic composites (WPC).

Boratherm™ SA 0020 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

MINBLOC® HC 1400 is a unique and distinctive combination of particle morphology, surface chemistry, and refractive index. MINBLOC® HC additives deliver excellent antiblocking performance and superior haze, gloss, and clarity values in packaging-grade flexible films without diminishing critical structural or mechanical properties.

Mistroblock 1HT-1HTC is a bright, micro-lamellar talc with the finest size distribution among the Mistroblock® products to maximize clarity and provide a minimum effect on haze. It is developed specifically for polyolefin film anti-blocking applications with excellent mechanical film properties. Mistroblock® 1HT is surface modified for reduced interaction with processing aids and improved dispersion in masterbatch applications. Mistroblock® 1HTC is the compacted form of Mistroblock® 1HT and is recommended for maximum extruder throughput and minimum dust formation.

AFCONA 3770 is a leveling agent with good defoaming effect and anti-crater working for solvent-based coatings. Fluorocarbon modified acrylic polymer. AFCONA 3770 is a fluorocarbon modified acrylic polymer. Besides acting as an effective leveling agent, it also gives a strong defoaming effect as well as anti-crater properties.

TYTAN™ APZ900 is a zirconium complex with α-hydroxy acid ester that can be used as an adhesion promoter for printing, crosslinker for paints and as a catalyst for esterification. Due to its chelated structure, TYTAN™ APZ900 shows a delayed reaction at ambient temperature and thus facilitates the storage stability of inks. Compared with organo-titanate adhesion promoters, it shows good compatibility with PVB, CAB, and CAP inks and provides minimal discoloration during the sterilizing process in the printing of milk pouches.

MINBLOC® MC-151 belongs to the MINBLOC® MC series of antiblocking additives that are produced from an inert, naturally occurring alpha quartz with a unique surface morphology. With nearly the same refractive index as the barefoot resins, MINBLOC® MC grades are ideal for PET, LLDE, LDPE, and other clear or opaque resin and film applications.

MINBLOC® MC-101 belongs to the MINBLOC® MC series of antiblocking additives that are produced from an inert, naturally occurring alpha quartz with a unique surface morphology. With nearly the same refractive index as the barefoot resins, MINBLOC® MC grades are ideal for PET, LLDE, LDPE, and other clear or opaque resin and film applications.