Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Product Properties
- Outstanding adhesive properties
- Non-yellowing
- Elastic
- High surface hardness
- Very good corrosion protection / active corrosion protection due to zinc phosphate base
- One-pot system
- Weather-resistant
- Good chemical resistance
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Usage
- Satin-gloss, 2-component PUR primer and top coat with excellent adhesion properties on steel, aluminum, galvanized steel (galvanizing), stainless steel, powder-coated substrates, OSB panels, wood, MDF, many plastics (rigid PVC, ABS, polyester, etc.) and mineral surfaces (walls, floors).
- The product can also be used as a textured coating, for example on machines, office equipment and laboratory equipment.
- Indoor and outdoor use.
- Drying
Low temperatures and/or poor ventilation can have a negative effect on drying.
- Spreading Rate
15 m²/L
- Application Method
Brushing, rolling, spraying
- Cleaning Tool
Thinner or white spirit
- Processing Temperature
- at least + 8° C
- Ambient and object temperature
- Airless Processing
Adjustment of Viscosity Dilution: 0 - 10% Nozzle Bore 0.024 in Injection Pressure 100 - 300 bar Spray Angle Component-dependent - High Pressure Spraying
Adjustment of Viscosity Dilution: 5 - 20% Nozzle Bore 1.2 - 1.5 mm Work Pressure 3 - 5 bar - Ground Preparation for Powder-coated Components
- Apply base coating with 2C epoxy resin bonding primer.
- Basically, we re commend applying it over a test area.
- Instructions for Processing
- The product must be stirred carefully before use.
- The substrates must be free of dirt, separating substances, dry and stable.
- Please always observe the guidelines of the BFS (Federal Committee for Paint and Property Protection, Frankfurt am Main).
- When coating optically connected surfaces, make sure that the batches are the same and/or mix the total amount required with each other.
- In the event of contact with products containing plasticizers (door and window seals, etc.), the harmlessness of the sealing profile manufacturer must be obtained or a test coat is necessary.
- Timely care and renovation work are necessary for the durability of the coated surfaces.
Properties
- Typical Properties
- Viscosity
The material is ready to use.
| Value | Units | Test Method / Conditions | |
| Drying (Dust Dry After) | 40.0 | minutes | - |
| Drying (Touch Proof After) | 16.0 | hours | - |
| Density | 1.33 - 1.41 | g/m³ | - |
| Mix Ratio by Volume | 8:1 | - | - |
Storage & Handling
- Pot Life
- 6 hours