Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Donarra HDPE Advantages
- Can be easily cut, colored, machined and welded for easy fabrication
- Can be used for some structural fabrication because of its superior strength
- Much stronger than Low-Density Polyethylene
- Moisture resistant
- Impact resistant
- Material will not splinter
- Very resistant to cleaning agents.
- Capabilities
- Custom sheet plastic extrusion
- Polyolefin products
- HMWPE, HDPE, etc.
- Sheet width up to 77 inches
- Gages from 1" - .750".
- Rolled sheet plastic made to customer specifications
- Co-extrusion capability
- Laminations on plastic sheet
- Efficient use of post-consumer recycled plastic
- Unique custom orders with rapid response
- Lightweight polyethylene sheet
- Custom color match
Applications & Uses
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Density | 0.96 | g/cm³ | ASTM-R1505 |
| Melt Mass Flow Rate | 0.7 | g/10 min | ASTM-D1238 |
| Tensile Strength (Yield) | 4500.0 | psi | ASTM-D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM-D638 |
| Flexural Modulus (1% Secant) | 210000.0 | psi | ASTM-D790 |
| Ultimate Elongation | 710.0 | % | ASTM-D638 |
| Tensile Impact Strength | 90.0 | Ft.lb/in² | ASTM-D1822 |
| HDT | 80.0 | °C | ASTM D-648 |
| Vicat Softening Point | 128.0 | °C | ASTM-D1525 |
| Low Temperature Brittleness | max. -75 | °C | ASTM D-746 |
| Hardness | 66.0 | RockwellR | ASTM D-785 |
| Flammability Rating | Passes | - | UL94 HB |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Finishes
- Marine
- Levant
- Smooth
- Specifications
in: 1/8" 3/16" 1/4" 3/8" 1/2" 5/8" 3/4" mm: 3.18mm 4.76mm 6.35mm 9.53mm 12.7mm 15.88mm 19.05mm