Products

Facilan™ PCL100 (polycaprolactone 100) is a polycaprolactone material used widely for research applications in biofabrication such as scaffolds, braces, implants, smart materials, hydrogels, tissue engineering and drug delivery. Polycaprolactone in is reported in research tough, strong, flexible, bioabsornanle, biocompatible and compostable. It is based on raw material complaint with European regulation EC No. 10/2011 concerning plastic materials and articles coming into contact with food. Recommended restrictions. Do not use in medical applications involving permanent implantation in the human body.

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

Polyphenylsulfone (PPSU) is an amorphous high performance thermoplastic offering better impact resistance and chemical resistance than PEI. PPSU can operate in temperatures up to 180Cᵒ. PPSU has superior hydrolysis resistance when compared to other amorphous thermoplastics as measured by steam autoclaving cycles, it has virtually unlimited steam sterilizability. It also resists common acids and bases over a broad temperature range. Applications are; Aerospace, Aircraft, Automotive, Dental, Medical, Surgical instruments. The PPSU filament is based on the technology of Solvay.

TPC-91A Filament is a thermoplastic copolyester elastomer with both thermoplastic and elastomeric properties. TPC Filament is easier to print compared to other flexible filaments like TPU. The layer bonding in the Z direction of this material is extremely good meaning that it's almost impossible to detach the printed layers. Typical applications for this material are drive belts, vibration dampers, phone cases, wearables and other objects that need to take a lot of wear.

Luvocom® 3F PEEK CF 9676 BK Filament is a 15% carbon reinforced PEEK (Polyether Ether Ketone) with extraordinary characteristics in terms of mechanical, thermal and chemical resistance. PEEK with carbon is used in demanding industries like oil and gas, automotive, mechanical engineering, aircraft and aerospace technologies. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts.

Luvocom® 3F PAHT 9825 NT Filament is a unreinforced High-temperature polyamide. Its water uptake takes about 4 times longer to reach the saturation point compared to unmodified PA6, also its saturation point is 5 times lower than conventional PA6 materials. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.

LUVOCOM® 3F PEKK 50082 is engineered to outperform the standard PEKK materials available in the market. It comes with enhanced flow behavior which improves the printability and layer adhesion. This unique modified neat PEKK provides dimensional stability and is printable in non-heated chambers, delivering semi-crystalline parts with no warp.

PETG Filament (Polyethylene Terepthalate Glycol-modified) is the common thermoplastics of the polyester family and is used in fibers for clothing, bottles for liquids and foods. PETG is a modified PET, PETG is a clear amorphous thermoplastics with a lower melting point than PET.

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

Acrylonitrile-Styrene-Acrylate (ASA) polymers are amorphous and have mechanical properties similar to those of ABS plastics. However, the ASA properties are far less affected by outdoor weathering. The outstanding weather resistance abilities of ASA is due to the acrylic ester elastomer. ASA parts have good chemical and heat resistance, and high impact strength, even at low temperatures. Typical ASA applications are buiding/construction, automotive and recreation parts.

PETG Carbon Filament is a Polyethylene Terephthalate reinforced with carbon fibers. Due to the carbon fibers compounded in the PETG you can create 3D printed parts with exceptional stiffness, great dimensional stability and excellent suface quality. This filament is highly suitable for printing a wide range of industrial applications like frames, drones, tools, parts for the automotive and more.

ABS ESD Filament has been designed for protection of electronic devices which are sensitive to electrostatic discharges. The material prevents the risk of damage to vulnerable electronic components due to its dissipative properties. Its surface resistivity ranging from 10^7 to 10^9 Ohm. The filament is ideal for industrial applications like housings / casings for connectors, sensors and measuring devices. Available in black and its natural color.

Elogio AM PLA Filament (Polylactic Acid) is a biodegradable plastic coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants.PLA is a polyester that is built from several lactic acid units. It is colorless and transparent. PLA has a density of about 1.25 kg/cm3. Polymers made of lactic acid are flammable.

ABS KEVLAR has been designed for 3D printing by a precise formulation of aramid fibers into ABS materials. The aramid fibers assuring dimensional stability ,preventing the printed object to warp and even make the printed object lighter than regular ABS.

Luvocom® 3F PAHT CF 9891 BK Filament is a high temperature carbon fiber (15%) reinforced polyamide (PA). This grade is based on PA6 and is easy to print with low warping and improved layer bonding is optimized for industrial applications. Typical industries where it is commonly used are in robotics, drones, automotive, aerospace and also widely in the field of functional prototypes and end parts. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts, the filament can be used on conventional FFF / FDM 3D printing systems without an heated chamber.

Facilan™ HT is a material with a heat deflection temperature of 89 °C and comparatively high tensile strength. The raw material has food contact approval and is not based on Bisphenol-A. Facilan™ HT has been created as a higher performance replacement for PET, PET-G and other copolymers. High stiffness, high strength and high gloss combine to give this material good characteristics to be used in machine building, construction and for end use consumer parts. HT has been created to make parts that survive real life

Facilan™ Ortho was developed in conjunction with orthotics and insoles researchers, manufacturers and patients to be high-performance material for orthotics, shoe soles and insoles. It is the world's first material designed specifically for orthotics. Unique hot melt properties make Ortho ideally suited for adhesion to leather and textiles. Facilan™ Ortho is based on compostable raw material according to EN 13432.

Facilan™ C8 is the first product of our Facilan™ family. End use industrial parts and consumer friendly printed parts as well as high end prototypes for business are the applications areas for C8. The first Fi􀅜h Generation 3D printing material, Facilan™ C8 has better mechanical qualities, best surface quality and high tolerances that combine to make a material suited for high throughput and high repeatability production in Additive Manufacturing.

Luvocom® 3F PPS CF 9938 BK Filament is a Polyphenylene sulfide, linear with 15% added carbon fibers, and is known for it's heat and chemical resistance. Below 200 °C the material doesn't dissolve in any solvent. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.

Elogio AM ABS Filament is a thermoplastic and a copolymer that is used for rigid objects. It consists of 5-30% Butadiene, around 50% Styrene and the rest is Acrylonitrile. ABS is a strong material with high toughness and impact resistance. The maximum operating temperature is between 85 °C and 100 °C, depending on the modifications. The minimum operating temperature is -35 °C. ABS is a flammable polymer to which flame retardant can be added. It is also subject to aging by being exposed to the weather conditions (UV light, oxygen, moisture, heat) because Polybutadiene stimulates the oxidation of Polystyrene. This causes discolouration and the plastic loses its mechanical strength. In order to improve this UV stabilizers can be added.