Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Excellent thermal stability.
- Very good chemical resistance.
- Very good anti-seizing/anti-galling properties.
- Ideal for higher load carrying applications.
Applications & Uses
- Applications
- Application Method
- Cure Method
- Markets
- Aerospace/Defense
- Mechanical Components
- Industrial Machinery & Equipment
- Fasteners
- Typical Applications
- Virtually all fasteners.
- Threaded connectors and disconnects.
- Engine Fasteners.
- Specialty nuts and washers.
- Suggested Pretreatment
Grit Blast
- Suggested Application Method
Dip Spin / Spray
- Dilution/Cleanup Solvent
Ready to Apply, Clean up with Water.
- Cure Cycle
2 hours at 175°F then 2 hours at 400°F.
Properties
- Physical Properties
- Typical Properties
- Chemical Resistance
Value | Units | Test Method / Conditions | |
Binder | Silicate | - | - |
Carrier | Water Borne | - | - |
Appearance | Matte Gray Finish | - | - |
Density | 11.5 - 12.1 | Ib/gal | - |
Lubricating Solid | MoS₂ | - | - |
Solids (By Weight) | 37 - 41 | % | - |
Theoretical Coverage (0.5 mils) | 458.0 | ft²/gal | - |
VOC Content | 0.0 | grams/liter | - |
Value | Units | Test Method / Conditions | |
Abrasion Resistance | Fair | - | ASTM D-4060 |
Coefficient of Friction | 0.04 - 0.06 | - | ASTM D2714 |
Corrosion Resistance Test Panel (5% Neutral Salt Spray) | max. 100 | hours | ASTM B117 |
Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) | 0.8 | mil | - |
Dry Film Thickness | 0.5 - 1 | mils | - |
Load Carrying Capacity | min. 250000 | psi | ASTM D2625, Method B |
Operating Temperature Range | -300 - 800 | °F | - |
Wear Life | max. 60 | minutes | ASTM D2625, Method A |
Value | Units | Test Method / Conditions | |
Acetone | Pass | - | ASTM D-2510, Method C |
Anti-Icing Fluids | Pass | - | ASTM D-2510, Method C |
Diethanolamine | Pass | - | ASTM D-2510, Method C |
Distilled Water | Not Recommended | - | ASTM D-2510, Method C |
Hydraulic Fluids | Pass | - | ASTM D-2510, Method C |
Hydrochloric Acid (10%) | Not Recommended | - | ASTM D-2510, Method C |
Isopropyl Alcohol or Ethyl Alcohol | Pass | - | ASTM D-2510, Method C |
Jet Fuels (JP-4) | Pass | - | ASTM D-2510, Method C |
Mineral Spirits or Paint Thinner | Pass | - | ASTM D-2510, Method C |
Skydrol 500 | Pass | - | ASTM D-2510, Method C |
Sodium Hydroxide (10%) | Not Recommended | - | ASTM D-2510, Method C |
Toluene | Pass | - | ASTM D-2510, Method C |
Trichloroethylene | Pass | - | ASTM D-2510, Method C |
Packaging & Availability
- Packaging
Esnalube 382 is available in gallons and quarts.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.