Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
- Excellent thermal stability.
- Excellent coefficient of friction.
- Good wear life and higher load carrying capacity.
- Lox Compatible.
Applications & Uses
- Applications
- Application Method
- Cure Method
- Markets
- Aerospace/Defense
- Mechanical Components
- Industrial Machinery & Equipment
- Chemical Processing
- Typical Applications
- Threaded connectors and disconnects.
- Rings and seals.
- Virtually all fasteners.
- Bushings, rotary joints, cams and pins.
- Suggested Pretreatment
Grit Blast
- Suggested Application Method
Spray
- Dilution/Cleanup Solvent
Deionized Water
- Cure Cycle
2 hour at 175°F ± 25°F, then 2 hour at 400°F ± 25°F.
Properties
- Physical Properties
- Typical Properties
- Chemical Resistance
| Value | Units | Test Method / Conditions | |
| Binder | Silicate | - | - |
| Carrier | Water Borne | - | - |
| Appearance | Matte Gray Finish | - | - |
| Density | 13.1 - 14.1 | Ib/gal | - |
| Lubricating Solid | MoS₂, Graphite | - | - |
| Solids (By Weight) | 51 - 55 | % | - |
| Theoretical Coverage (0.5 mils) | 936.0 | ft²/gal | - |
| VOC Content | 0.0 | grams/liter | - |
| Value | Units | Test Method / Conditions | |
| Abrasion Resistance | Fair | - | ASTM D-4060 |
| Coefficient of Friction | 0.02 - 0.04 | - | ASTM D2714 |
| Corrosion Resistance Test Panel | max. 48 | hours | ASTM B117 |
| Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) | 0.5 | mil | - |
| Dilution Ratio (Product to Solvent) | Concentrate to 1:1 | - | - |
| Dry Film Thickness | 0.2 - 0.6 | mils | - |
| Load Carrying Capacity | max. 100000 | psi | ASTM D2625, Method B |
| Operating Temperature Range | -365 - 750 | °F | - |
| Wear Life | min. 60 | minutes | ASTM D2625, Method A |
| Value | Units | Test Method / Conditions | |
| Acetone | Pass | - | ASTM D-2510, Method C |
| Anti-Icing Fluids | Pass | - | ASTM D-2510, Method C |
| Diethanolamine | Pass | - | ASTM D-2510, Method C |
| Distilled Water | Not Recommended | - | ASTM D-2510, Method C |
| Hydraulic Fluids | Pass | - | ASTM D-2510, Method C |
| Hydrochloric Acid (10%) | Not Recommended | - | ASTM D-2510, Method C |
| Isopropyl Alcohol or Ethyl Alcohol | Pass | - | ASTM D-2510, Method C |
| Jet Fuels (JP-4) | Pass | - | ASTM D-2510, Method C |
| Mineral Spirits or Paint Thinner | Pass | - | ASTM D-2510, Method C |
| Skydrol 500 | Pass | - | ASTM D-2510, Method C |
| Sodium Hydroxide (10%) | Not Recommended | - | ASTM D-2510, Method C |
| Toluene | Pass | - | ASTM D-2510, Method C |
| Trichloroethylene | Pass | - | ASTM D-2510, Method C |
Packaging & Availability
- Packaging
Everlube 811 is available is gallon, 5-gallon pail, and quart.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.