Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Applications & Uses
- Applications
- Base Chemicals End Uses
- Applications
EXAFLEX 5034 is recommended for cold cure molded and integral skin foam formulations. The high resiliency molded foam manufacture using EXAFELX 5034 shows better bounce and the integral skin foam produced using this polyol gives good skin. Well recommended for automotive and furniture seating and also for steering wheels arm rest etc
Properties
- Physical Form
- Appearance
- Clear liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Colour | max. 50 | APHA | - |
Viscosity at 25 °C | 900 ± 100 | cP | - |
Hydroxyl Number | 34 ± 2 | mg KOH/g | - |
Water Content | max. 0.05 | % | - |
pH Value | 7 – 8.5 | - | - |
Specific Gravity at 25 °C | 1.01 ± 0.02 | - | - |
Safety & Health
- Health and Safety
EXAFLEX 5034 is physiologically harmless.
This product is not particularly dangerous for health. In any case is suggested to observe following precautions:-
- To wear appropriate protection for body and eyes
- The working room must be ventilated
- In case of contact with skin or eyes to wash accurately with clean water and if sprayed on eyes ask for medical intervention.
- To absorb eventual losses with sand or sawdust.
Polyurethanes produced from this product may present a _x001f_re hazard in certain applications if exposed to _x001f_re and/or excessive heat and oxygen, e.g., welding and cutting torches.
Expanded Polymer Systems Pvt. Ltd. guarantees that its products are of the highest quality provided that the conditions recommended in the present instructions are carried out regarding their conservation, maintenance and use.
The high quality of Expanded Polymer Systems Pvt. Ltd. products does not exonerate the Buyer-User from making his own checks as to the suitability of the product.
Expanded Polymer Systems Pvt. Ltd. will not stand responsible for any emerging problems occuring in the eventual transformation of its products which is taken at t
Packaging & Availability
- Packaging Type
- Packaging
210 kg net in steel drums
Storage & Handling
- Storage and Handling
EXAFLEX 5034 is slightly hygroscopic and should therefore be stored under cool and dry conditions at 25 – 35 °C. Even under these conditions EXAFLEX 5034 absorbs small quantities of atmospheric moisture. Partially used drums should be properly resealed before keeping for extended storage.
- Shelf Life
Shelf life under speci_x001f_ed storage conditions is 6 months.