Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Increased Production - Increased parts life reduces downtime for repairs or parts replacement coupled with decreased labor to repair those parts. Increased production increases revenues.
- Excellent Corrosion Protection - SMG Gold provides long life in corrosive environments.
- Resistance to Water - These greases are insoluble in water.
- High Extreme Pressure Properties - They will carry heavy loads due to inherent EP properties.
- Excellent Shear Stability - Will not thin down due to heat or shear, even with heavy water wash.
- Excellent Thermal Stability - May be used to 572°F with proper re-lubrication cycles.
Applications & Uses
- Markets
- Application Area
- Applications
SMG Gold grease is ideal where hot and cold, low and high-speed bearings must share the same lubricant. Designed for wet and hot end use for roll neck journal bearings found in Paper & Steel Mill operations. Excellent for heavily loaded hinge pins, splines, couplings, CV and universal joints. Use on rolling mills, slabbing mills, truck chassis, wheel bearings; also general lube points on track rolls of heavy duty construction and earth moving equipment. This grease can withstand higher speeds and higher constant temperatures than our other multipurpose greases.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Kinematic Viscosity of Base Oils (40°C) | 118.0 | cSt | - |
Worked Penetration (60 Strokes, 25°C) | 280.0 | mm/10 | - |
Mechanical Stability (P 100000 Strokes, % Change From P60) | 2.4 | % | - |
Mechanical Stability (P 100000 Strokes, 50% H2O, % Change From P60) | 6.5 | - | - |
Shell Roll Stability (% Change From P60) | 3.2 | % | - |
Timken OK Load | 80.0 | lbs | - |
4-Ball EP Weld Load | 620.0 | kgf | - |
LWI | 80.0 | - | - |
4 Ball Wear, Scar Dia (40kg Load, 1200 RPM, 75°C, 1h) | 0.38 | mm | - |
Dropping Point | 594.0 | °F | - |
Rust Test | Pass | - | - |
Copper Corrosion | 1B | - | - |
Salt Fog Spray | min. 1000 | h | - |
Water Washout (80°C) | 1.0 | % | - |
Oxidation Bearing Life | 200.0 | h | - |
Rotary Bomb Oxidation (PSI Drop, 500h) | 6.0 | lbs. | - |