Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Fluids & Lubricants Features
- Product Highlights
It is a kind of low-phosphorus, low-sulfur, low-ash, energy-saving, consumption-lowering and emission-reduction premium gasoline oil complex agent, and is applicable for preparing GF series as well as API/SL, SM and SN premium oil in accordance with ILSAC international standards. Compared with the traditional gasoline engine oil compound, better low temperature dispersion, high temperature oxidation resistance, high and low temperature anti rust, can effectively inhibit sludge and sediment formation, improve the durability of oil, slow down the corrosion of the alloy bearings. There are outstanding anti – wear, anti – friction, repair and anti – abrasion ability, to extend the life of the component. In particular, nano boron ceramics, small particle size, high hardness, the new car can accelerate the fine run in, the old car can be polished repair, normal state can achieve the hard spheres rolling friction, energy saving. Low phosphorus low sulfur, can prevent the three way conversion device catalytic agent poisoning failure and oxygen sensor failure, improve and the durability of the catalyst compatibility and exhaust system.
Applications & Uses
- Applications
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Scope of Application
- The product is for preparing premiumenergy-saving and environment-protection gasoline engine oil by using Classes API-I, II, III and IV base oil in accordance with ILSAC and API standards.
- Recommended Dosage: SJ/GF-27.8%, SL/GF - 37.5% and SM/GF - 48.5%
Properties
- Appearance
- Vicious reddle liquid
- Specifications
Value | Units | Test Method / Conditions | |
Density (20°C) | 950 - 1050 | kg/m³ | GB/T1884/T1885 |
Kinematic Viscosity (100°C) | 60 - 70 | mm²/s | GB/T265 |
Flash Point (Opening) | min. 180 | °C | GB/T3536 |
Pour Point | max. -12 | °C | GB/T3535 |
Total Base Number | min. 80 | mgKOH/g | SH/T0251 |
Sulfate Ash | max. 5 | % | GB/T2433 |
Calcium Content | 1 - 1.2 | % | SH/T0270 |
Nitrogen Content | 0.4 - 0.7 | % | SH/T0224 |
Boron Content | 0.3 - 0.4 | % | EPA3050B, ERA6010C |
Storage & Handling
- Attentions for Storage and Use
Packaging, marking, transportation, storage and acceptance of delivery are performed as per SH/T0164. 200Kg packaging with galvanized iron bucket shall be stored in dry and ventilated storehouse below 45°C; Blending temperature should not exceed 75°C. The product is non-flammable, non-explosive, non-corrosive. General chemical prevention measures shall be taken in feeding and using process to avoid contacting with skin. Once touching, wash out with soap water.