Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlight
Ura-Zen™ High Solids Urethane topcoats consist of the highest-quality materials in a VOC-compliant solvent-based package. Ura-Zen™ topcoats are designed for a variety of industrial applications and provide superior weathering characteristics and increased process efficiencies, which means less down time and greater cost savings.
Offers superior gloss, DOI and color/gloss retention for optimum exterior durability as well as outstanding chemical and stain resistance. Ura-Zen™ can be matched to virtually any color and is also available as an in-plant intermix system.
Applications & Uses
- Markets
- Best For
For applications over Hentzen AP series urethane topcoats
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Optimum Dry Thickness | 2.0 | mils | - |
| Gloss (60°) | min. 90 | ||
| Mix Ratio (Part A:Part B) | 3:1 | ||
| VOC | max. 3.5 | lbs/gal | - |
| ls HAPs Free Formula | Yes | - | - |
| 30 Minute Induction Time Needed | No | - | - |
| Pot Life (Before 50% Increase in Viscosity) | 4.0 | hours | - |
| Wet Film Sag Resistance | 3.5 | mils | - |
| Air Dry to Touch | 3.5 | hours | - |
| Air Dry to Handle (Hard Dry) | 8.0 | hours | - |
| Air Dry Full Cure | 2.0 | Weeks | - |
| Force Cure - Ambient Flash Time Before Baking | 5.0 | minutes | - |
| Force Cure - Recommended Cure Time (140°) | 20.0 | minutes | - |
| Minimum Dry Time Before Product can be Sanded (After Bake) | 24.0 | hours | - |
| Corrosion Resistance | Use with primer | - | - |
| Weathering | Excellent | - | - |