Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Product Highlights
RA-44W is a water-based release coating, a low adhesion backside (LAB), designed for tapes with paper as a substrate. It is effective for providing an easy to moderate release from adhesives based on acrylic, natural rubber, SBR and SIS block copolymers. Typical tape backings used with RA-44W are latex-impregnated crepe and flat papers. RA-44W may be used as shipped or may be diluted with water to 20-40% total solids, depending on the paper, adhesive, and coating method. Coating methods include Mayer rod rotogravure roll, knife over roll, and various slot/roll configurations. The recommendation for laboratory evaluation for a saturated crepe is as follows: Draw down the emulsion as is, or dilute with water using a #6 Mayer rod and dry in an air oven at 100-150°C for 5 minutes or until dry. Dry coating weights may be in the 5-10 g/sm range. In-plant scale operations, release properties develop by flashing off the water at 120-175ºC (250-350°F) for 2-10 seconds, depending on web speed, oven length, drying air temperature and velocity, and oven configuration.
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Applications
RA-44W is effective for providing an easy to moderate release from adhesives based on acrylic, natural rubber, SBR and SIS block copolymers. Typical tape backings used with RA-44W are latex-impregnated crepe and flat papers.
Properties
- Appearance
- Milky Liquid, Milky Liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Total Solids | 40-42 | % | - |
Viscosity | 200 | cps | - |
pH | 8 | - | - |
Technical Details & Test Data
- Unwind Adhesion Value
BASED ON PREMIUM OPP PACKING TAPE WITH SIS-BASED PSA
GREEN (OFF-SLITTER) EASY - 230 AGE 150ºF (65ºC) FOR 72 HR MODERATE - 360 AGE 120ºF (49ºC) AT 90% RH FOR 72HR MODERATE - 340 SHELF STORAGE 12 MONTHS MODERATE - 360