Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Chemical Character
- Blend of aqueous dispersion containing polymers
- Ionic Nature
- Anionic
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Properties
Film Properties The dried and fixed print paste films remain flexible and are easy to remove in a normal washing-off process Rheology Print pastes produced with INDRA REACT-PRINT RTAN have distinct pseudoplastic properties showing an excellent printing behavior Color Yield INDRA REACT-PRINT RTAN does not impair the natural color depth and brilliancy of the prints. Stability Well compatible with the auxiliaries and P-series dyestuffs of any reputed company. It is sensitive to water hardeners, electrolytes, ionic auxiliaries and dyestuffs. The viscosity drops and in extreme cases precipitations occur. Filterability Stock pastes produced with INDRA REACT PRINT – MN RT should be kept for several hours preferably overnight
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Ink & Toner Type
- Applications
Diluting Instruction
- With INDRA REACT PRINT-RT AN (SUPER) neutral stock thickenings can be produced by stirring into prepared soft water.
Textile Substrates
- INDRA REACT PRINT-RT AN (SUPER) can be used for reactive printing on all types of textile substrates
Properties
- Physical Form
- Soluble in
- Cold Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Viscosity at 20 rpm Brookfield Viscometer | 70000 - 80000 | cps | - |
pH Value (Aqueous Solution 4 %) | 6.0 - 7.0 | - | - |
Technical Details & Test Data
- Stock Paste Preparation
Preparation of Stock Thickening:
96.0% Water
4.0% INDRA REACT PRINT-RT AN (SUPER) (can be adjusted to get desired viscosity)
100% stock thickening
- Prepare cold or warm water.
- Sprinkle INDRA REACT PRINT-RT AN (SUPER) with constant stirring.
- Continue stirring for 30 minutes at high speed.
- Keep the prepared paste optimum for 8 to 10 hrs to attain maximum viscosity, briefly stir the stock up again &the stock is ready to use.
Preparation of Print Paste:
x g Water
10g POORA WOX Granulat
100-200 g Urea
20 - 25 g Sodium hydrocarbonate or soda
y g INDRA REACT PRINT-RT AN (SUPER) (stock paste)
z g Reactive dyestuff (P-series)1,000 g Total
The best compatibility & optimized results can be achieved with Reactive ‘P’ series dyestuffs from any reputed company.
Drying and Fixation Terms
The prints are given a drying and steaming treatment. Steaming is done according to the usual conditions of reactive printing.Washing off of printed goods
The printed goods must be thoroughly washed off to remove residual thickener & unfixed color. The procedure is as follows:
- Two cold rinse followed by two hot wash
- Soaping with 2.0 – 4.0 gpl POORA DWO281 @ 90°C
- Cold rinse
Packaging & Availability
- Packaging Type
- Packaging
Available in 50 kgs, 100 kgs and 200 kgs drums.