Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Designed for extreme release application
- Good chemical resistance
- Excellent for CO2, H2S, Chlorides and brine
- Low coefficient of friction
- Compatible with high temperature
- Thin film corrosion protection
- Specific Advantages
- Cured coating surfaces are very smooth
- Ideal when desiring minimum coating thickness while simultaneously providing a barrier against corrosion
- Thin film coating that can be built up to 2.5 mils (0.0025")
- No tolerance issues
Applications & Uses
- Applications
- Application Area
- Successful Applications
- IPC’s thin film coatings have been successfully applied to the wetted parts of a wide array of Oilfield components which are subject to severely corrosive environments.
- Components such as valves, fittings, pipe spools, down hole completion tools etc. are some examples of what we can do.
- IPC has proven coatings for Severe Service Conditions for various applications (injection wells, brine service, CO2/H2S service), in the most corrosive fields in Western Canada – Judy Creek, Brintnell, Pelican Lake, Redwater, the Bakken Play, the Cardium Play, Horn River, Provost, Winter, Zama.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Salt Spray Resistance | min. 1000 | hours | ASTM B-117 |
Maximum Use Temperature | 500.0 | °F | - |
Coefficient of Friction (Static) | 0.12 - 0.2 | - | ASTM D1894 |
Coefficient of Friction (Dynamic) | 0.08 - 0.15 | - | ASTM D1894 |
Hardness | 56.0 | Shore D | ASTM D2240 |
Tensile Strength | 23.0 | MPa | ASTM D638 |
Elongation | 325.0 | % | ASTM D638 |
Flexural Modulus | 600.0 | MPa | ASTM D790 |
Dielectric Strength | 2000.0 | V/m | ASTM D149 |
Surface Resistivity | min. 1X10¹⁸ | Ohm/sq | ASTM D257 |
Water Absorbtion | max. 0.01 | % | ASTM D570 |
Regulatory & Compliance
- Certifications & Compliance