Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Industrial Uses
Type - FluoroGrip® – F fluoropolymer film is manufactured from high molecular weight fluorinated ethylene propylene (HD-FEP) resin by Integument Technologies, Inc.
Uses
- FluoroGrip® – F film is made from high molecular weight resin for applications where chemical resistance, high flex life and stress-crack-resistant performance are required.
- Typical applications include tank and secondary containment linings, “splash-and-spill” paint replacement, acid brick and the membranes.
- The outstanding chemical and thermal resistance withstands aggressive environments, making it an excellent candidate for a wide variety of aggressive chemical and thermal environments.
- Fabricated shapes and contours can be produced via heat sealing and thermoforming. The outstanding weatherability and optical properties of FluoroGrip® – F film provides excellent performance in outdoor atmospheric environments.
- The non-stick surface, chemical resistance, and 300-450°F (depending upon adhesive) usage temperature make FluoroGrip® – F an ideal release film for internal linings and paint replacement where a “non-stick” surface is desirable such as silos, stock chests and food processing areas (walls, equipment, bulk powder handling equipment, chutes, etc.).
- Single-side modification makes the material suitable as a 30-mil hot-air weldable lining when low surface energy is demanded. Double-sided treatment is especially useful when installations require seams, overlaps or the application of chemical resistant coatings or top toppings.
- The double-sided modification makes it an ideal material for pipe wraps and tapes and general purpose film. The modification also creates a superior surface for use as a chemical and temperature resistant underlayment or membrane where the application of chemical resistant toppings permits its use in traffic and secondary containment lining applications.
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Chemical Resistance
- Optical Properties
Value | Units | Test Method / Conditions | |
Tensile Strength at Break | 24.0 | MPa | ASTM D-882 |
Elongation at Break | 300.0 | % | ASTM D-882 |
Tensile Modulus | 480.0 | MPa | ASTM D-882 |
Initial Tear Strength (1 mil) | 2.2 - 2.7 | N | ASTM D-1004 |
Initial Tear Strength (2 mil) | 4.9 - 5.3 | N | ASTM D-1004 |
Propagating Tear Strength (1 mil) | 1.4 - 1.5 | N | ASTM D-1922 |
Propagating Tear Strength (1 mil) | 2.4 - 2.7 | N | ASTM D-1922 |
Fold Endurance (M.I.T.) | 10000.0 | cycles | ASTM D-2176 |
Value | Units | Test Method / Conditions | |
Oxygen Index | 95.0 | % | ASTM D-2863-77 |
Specific Gravity | 2.12 - 2.17 | - | ASTM D-792 |
Melt Point (DTA) | 500.0 | °F | ASTM D-3418 |
Yield (1mil film) | 18.0 | m²/kg | - |
Flammability | V - 0 | - | ASTM UL-94 |
Water Absorption (24 hrs) | max. 0.01 | % | - |
Hardness | D55 | Shore D | ASTM D-785 |
Elongation at Break (RT) | 300.0 | % | ASTM D-882 |
Tensile Strength at Break | 3000.0 | psi | ASTM D-882 |
Low Temperature Embrittlement | VTM-0 | °F | - |
Value | Units | Test Method / Conditions | |
Melt Point | 252 - 282 | °C | ASTM D-3418 |
Continuous Service Temp (Acrylic Adhesive) | 163.0 | °C | - |
Continuous Service Temp (Silicone Adhesive) | 206.0 | J/(k°K) | - |
Specific Heat | 1172.0 | w/(m°K) | - |
Coefficient of Thermal Condctvty | 0.195 | mm | - |
Coefficient of Linear Thermal Expansion | 9.9 x 10⁻⁵ | (mm°C) | ASTM D-696 |
Limiting Oxygen Index | 95.0 | % | ASTM D-2863 |
Value | Units | Test Method / Conditions | |
Dielectric Strength (1 mil) | 240.0 | kV/mm | ASTM D-149 |
Dielectric Constant (1kHz) | 2.1 | - | ASTM D-150 |
Dissipation Factor (1kHz) | 0.0003 | - | ASTM D-150 |
Value | Units | Test Method / Conditions | |
2000 Hours Salt Fog | Pass | - | - |
500 hours SO₂ | Pass | - | - |
Value | Units | Test Method / Conditions | |
Refractive Index | 1.341 - 1.347 | - | ASTM D-542 |
Solar Transmission | 96.0 | % | ASTM E-424 |
Regulatory & Compliance
- Certifications & Compliance
- Certifications
FluoroGrip® – F is designed to meet the requirements to comply with the FDA’s Register of Food Additive Regulations.
Packaging & Availability
- Availability
- FluoroGrip® – F is available standard with an advanced pressure sensitive adhesive (PSA) of acrylic or high temperature resistant silicone PSA. Special chemical resistant adhesives are available.
- Available Thicknesses (Film Only; Not Including Adhesive) - 2 mil, 5 mil, 10 mil, 20 mil, 30mil.