Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Uses
102 Asphalt Primer’s uses include prime coat over brick, metal surfaces, gypsum, concrete block and cinder block. It is also used to coat interior faces of masonry walls above grade and for all back- up materials such as stone, brick and concrete.
- Surface Preparations
All surfaces should be dry, clean and free from oil or grease, dust, dirt, loose paint or other foreign matter.
- Application
102 Asphalt Primer is easily applied by brush, roller or spray equipment. Recommended application temperature is 40°F to 120°F. If applying at temperatures lower than 40°F, the substrate must be free of moisture and/or ice crystals. Primer should be worked into all cracks, holes and crevices. Primer must be thoroughly dry to the touch (not wet) prior to coating applications.
- Coverage Rate
Apply at the rate of 0.5 to 1 gallon per 100 sq. ft. (8-16 wet mils) depending upon the condition and porosity of the surface to be primed.
Properties
- Physical Properties
Value | Units | Test Method / Conditions | |
Weight per Gallon | 7.85 lbs. | - | - |
Solids by Weight | 72% Nominal | - | - |
Solids by Volume | 66% Nominal | - | - |
Color | Black | - | - |
Application Temp. | 40°F to 120°F | - | - |
Dry Time | 8 to 24 hours | - | - |
Service Temp (Cured Film) | -40°F to 180°F | - | - |
Safety & Health
- Caution
Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin.Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Store in a heated room and keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Cover air intakes during application and while drying. Exterior use only.
Packaging & Availability
- Packaging Type
- Packaging
Available in 5-gallon pails and 55-gallon drums.