Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
PrimoPrene is a cost effective solution for replacing Santoprene rubber, styrenicRbased TPEs, and thermoset rubbers such as EPDM and Polychloroprene. It is an excellent
choice for applications requiring flexibility in the following markets: automotive parts, appliance, business machines, construction, consumer products, and electronics.
Properties
- Physical Properties
- Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Injection Molded (5 sec) | 40 | Shore D | ASTM D2240 |
| Injection Molded (15 sec) | 38 | Shore D | ASTM D-2240 |
| Specific Gravity (23°C) | 0.94 | g/cm³ | ASTM D-792 |
| Melt Flow Index (230°C,10kg Load) | 8 - 15 | g/10min | ASTM 1238 A |
| Melt Temperature (317°F) | 158.5 | °C | - |
| Compression Set (22hr, 70°C) | 59 | % | ASTM D-395 |
| Compression Set (70hr, 125°C) | 72 | % | ASTM D-395 |
| Brittle Point | -30 | °C | ASTM D-746 |
| Ozone Resistance (500hr, 100pphm O3 Conc.) | 100 | pphm | ASTM D-1149 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength (23°C, 500mm/min) | 17 | Mpa | ASTM D-412 |
| Tensile Modulus (100%, 23°C, 500mm/min) | 9 | Mpa | ASTM D-412 |
| Ultimate Elongation(23°C, 500mm/min) | 650 | % | ASTM-412 |
| Tear Strength (23°C, 500mm/min) | 80 | kN/m | ASTM D-624 (DieC) |