Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Characteristics
- Good resistance to atmospheric agents
- High purity (does not contain plasticizers, lubricants and fire retardant additives)
- High strength and rigidity
- High resilience even at low temperatures
- Good thermoplasticity
- Good weldability
- High continuous operating temperature
- Good electrical insulation properties
Excellent resistance to acids, oxidizing agents, halogens, alcohol, chlorinated solvents, aliphatic hydrocarbons, fuels. They are suitable for making components that require excellent resistance to chemicals even at high temperatures.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
Properties
- Physical Properties
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Tribological Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.79 | g/cm3 | ISO 1183 |
| Water (Absorption At Saturation) | 0.05 | % | ISO 62 |
| Moisture (Absorption At 23°C - 50% RH) | 0.05 | % | ISO 62 |
| Value | Units | Test Method / Conditions | |
| Yield Strength | 50-55 | MPa | ISO 527 |
| Rockwell Hardness | 75 | Scale M | ISO 2039-2 |
| Tensile Strength (Break) | 30-50 | MPa | ISO 527 |
| Elongation (Break) | 20-60 | % | ISO 527 |
| Tensile Modulus | 2300 | MPa | ISO 527 |
| IMPact Strength (Un-Notched) | NB | KJ /m2 | ISO 179 |
| IMPact Strength (Notch) | 10 | KJ /m2 | ISO 179 |
| Flexural Strength (3.5%) | 74 | MPa | ISO 178 |
| Flexural Modulus | 2250 | MPa | ISO 178 |
| Compressive Stress (1% Strain-23°C) | 17 | MPa | ISO 604 |
| Poisson'S Ratio | 0.35 | - | Abs |
| Value | Units | Test Method / Conditions | |
| Bondability | No. | - | - |
| Oxygen Limit Index | 44 | % | ISO 4589 |
| UV Resistance | Yes | - | - |
| Value | Units | Test Method / Conditions | |
| Maximum Operating Temperature | 150 | °C | - |
| Minimum Operating Temperature | -40 | °C | - |
| Heat Deflection Temperature (1.81 MPa) | 105 | °C | ISO 75 |
| Thermal Conductivity (23°C) | 0.19 | W/(K*m) | DIN 52612 |
| Coef. Of Linear Thermal Expansion (23 To 100°C) | 125-140 | μm | ASTM D696 |
| Value | Units | Test Method / Conditions | |
| Volume Resistance | 5 10^14 | Ω | IEC 60093 |
| Surface Resistance | min.10^13 | Ω | IEC 60094 |
| Dielectric Constant (1 MHZ) | 7.5 | abs | IEC 60250 |
| Dielectric Loss Factor (1 MHZ) | 0.15 | tan | IEC 60250 |
| Dielectric Witch (2mm) | 20-30 | KV/mm | IEC 60243 |
| Value | Units | Test Method / Conditions | |
| Flammability | V0 | - | UL 94 |
| Value | Units | Test Method / Conditions | |
| Static Coef. Of Friction On Polished Steel | 0.2-0.4 | abs | MPC test |
| Dynamic Coef. Of Friction On Polished Steel | 0.2-0.35 | abs | MPC test |
Regulatory & Compliance
- Food Contact Safety (FDA Compliance)
Yes (Test Method -DM 21.3.73)