Knowde Enhanced TDS
Identification & Functionality
- Base Chemicals Functions
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Key Attributes
- Blush resistant
- Fast evaporation rate
- Excellent leveling and gloss
- Highly miscible with other common organic solvents
- Compatible with most substrates used in electronic parts and enclosures
Attention!
For industrial or laboratory use only. Not for retail sale in California, Utah, and new hampshire.
Applications & Uses
- Applications
- Application Method
- Coating Type
- Applications & Usages
The moderate speed drying time of the 4353 makes it a good choice for dip or brush application of acrylic conformal coatings like the MG 419D.
- Thinning Instructions
Make necessary adjustments according to your paint and spray gun equipment usage instructions. A 1.0 (paint):1.0 (thinner) dilution is a common starting point. If sagging is observed, reduce the thinner ratio.
Properties
- Physical Form
- Odor
- Aromatic
- Physical Properties
Value | Units | Test Method / Conditions | |
Color | Clear | - | - |
Density (at 25 °C, 77 °F) | 0.85 | g/mL | - |
Viscosity (at 25 °C, 77 °F) | max. 20.5 | mm2/s | - |
Flash Point | -1 (30) | °C (°F) | - |
Freezing Point | max. -86 (max. -66) | °C (°F) | Tag Closed Cup |
Boiling Point | 82 (180) | °C (°F) | - |
Vapor Pressure (at 25 °C [77 °F] | 6.05 (45.4) | kPa (mmHg) | - |
Relative Evaporation Rate | 3.77 (ButAc = 1) | - | - |
Volatile Organic Compound (VOC) | 100 (850) | % (g/mL) | - |
MIR Value | 3.15 | - | - |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Compatibility
Substrate Compatibility : The 4353 Thinner 3 is compatible with most substrate materials found on printed circuit assemblies.
Solvent Miscibility : The 4353 is highly miscible with other common organic solvent. It can be mixed with- Alcohols
- Aldehydes
- Aromatic and Aliphatic Hydrocarbons
- Ethers
- Glycols
- Glycol Ethers
- Ketones
- Solubility Parameters
Solubility Parameters Value Solubility in water Slightly soluble Hansen Solubility Parameters a)
(cal/cm3)½ ; [MPa]½Total
Non-Polar
Polar
Hydrogen Bonding9.0 [18.3] 8.4 [17.2] 1.9 [3.8] 1.5 [3.0] - a) Hansen parameters calculate using component literature values and volume fraction composition.
Safety & Health
- Health, Safety, and Environmental Awareness
Environmental Impact : The 4353 has volatile organic content of 100% [850 g/L]. It is RoHS compliant. The toluene component is classified as a hazardous air pollutant.
Health and Safety : This liquid is highly flammable and should be kept away from flames and other ignition sources. Avoid breathing in fumes or direct contact with the material.
HMIS® RATING
NFPA® 704 CODES
Approximate HMIS and NFPA Risk Ratings Legend : 0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe)
Packaging & Availability
- Packaging Type
- Packaging and Supporting Products
Cat. No. Packaging Net Volume Net Weight Packaging Weight
4353-1L Can 945 mL/ 31.9 fl oz 803 g/ 1.77 lb 5.0 kg a)/ 11 a)
4353-4L Can 3.78 L/ 1 gal 3.21 kg/ 7.08 lb 3.24 kg/ 7.14 lb
- a) Pack of five bottles
Storage & Handling
- Shelf Life
- 5 Years
- Storage Parameters
Properties Value Shelf Life @22 °C [72 °F]
Storage Temperature a)5 y
-20 to 40 °C [32 to 104 °F]- a) Storage below zero is not necessary. Cool, dry, and well ventilated area is recommended