Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Key Attributes
- Creates strong permanent electrical connections
- Cures at room temperature
- Excellent adhesion to many substrates
- Room temperature storage
- Long shelf life
Applications & Uses
- Applications
- Application Area
- Application Method
- Recommended Preparation
- Clean the substrate with Isopropyl Alcohol, MG #824, so the surface is free of oils, dust, and other residues.
- Cure Instructions
The product will not cure at room temperature. Cure the adhesive in an oven at one of these time/temperature options:
- 15 min at 65 ˚C
- 7 min at 125 ˚C
- Syringe
- Twist and remove the cap from the syringe. Do not discard cap.
- Measure 1 part by volume of A.
- Measure 1 part by volume of B.
- Dispense material on a mixing surface or container, and thoroughly mix parts A and B together.
- To stop the flow, pull back on the plunger.
- Clean nozzle to prevent contamination and material buildup.
- Replace the cap on the syringe.
- Can or Jar
- Stir each part individually to re-incorporate material that may have separated.
- Measure 1.16 part by weight of A.
- Measure 1 part by weight of B.
- Thoroughly mix parts A and B together.
- Apply adhesive to the application area.
Properties
- Physical Form
- Thermal Properties
- Typical Properties
- Cured Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Thermal Conductivity (at 25 ˚C) | 1.4 | W/(m·K) | - |
Value | Units | Test Method / Conditions | |
Mix Ratio | 1:1 | Volume | - |
Mix Ratio | 1.2:1 | Weight | - |
Service Cure | 5 | Hours | - |
Viscosity (at 25 ˚C)ᴮ | 15000 | Pa·s | - |
Viscosity (at 25 ˚C)ᴬ | 1000 | Pa·s | - |
Working Time | 10 | Minutes | - |
Value | Units | Test Method / Conditions | |
Compressive Strength | 39 | N/mm2 | - |
CTE After Tg | 169 | ppm/˚C | - |
CTE Prior Tg | 54 | ppm/˚C | - |
Glass Transition Temperature (Tg) | 50 | ˚C | - |
Hardness Shore D | 73 | - | - |
Lap Shear (Aluminum) | 5.5 | N/mm2 | - |
Lap Shear (Stainless steel) | 3.8 | N/mm2 | - |
Outgassing (at 125 ˚C for 24 h) | 6.3 | % | - |
Resistivity | 1.0 x 10⁻³ | Ω·cm | - |
Service Temperature Range | -55 to 150 | ˚C | - |
Tensile Strength | 13 | N/mm2 | - |
Water Absorption | 0.04 | % | - |
Value | Units | Test Method / Conditions | |
Mixed Density | 2.29 | g/mL | - |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Available Packaging
Cat. No. Packaging Net Vol. Net Wt. 8331-14G 2 Syringe Kit 6 mL 14.4 g 8331-50ML 2 Jar Kit 50 mL 120 g 8331-200ML 2 Can Kit 200 mL 482 g
Storage & Handling
- Shelf Life
- 3 Years
- Storage and Handling
- Store between 16 and 27 ˚C in a dry area, away from sunlight (see SDS). To maximize shelf life, recap product firmly when not in use.