Products

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Semitron® ESd 500HR Polytetrafluoroethylene PTFE electro static dissipative shapes offer an excellent combination of low frictional properties, outstanding dimensional stability, and a high resistivity range of 10E9 to 10E11 ohms per square. Reinforced with a proprietary synthetic mica, Semitron® ESd 500HR PTFE is thermally stable up to temperatures of 500° F / 260° C without degradation, and possesses high thermal insulation and a low coefficient of friction. Due to these characteristics, this grade is ideal for applications where controlled bleed off of static charges is critical.Features:Reinforced with a proprietary synthetic mica for improved performanceLow frictional properties and outstanding dimensional stabilityHigh resistivity range of 10E9 to 10E11 ohms per squareThermally stable up to temperatures of 500° F / 260° C without degradationHigh thermal insulation and low coefficient of frictionBenefits:Ideal for applications where controlled bleed off of static charges is criticalCan withstand high temperatures without degradationLow coefficient of friction and high thermal insulation provide improved performance in various applicationsApplications:Inserts for sensitive devices to reduce damage from static dischargeOther applications where controlled bleed off of static charges is critical and PTFE is typically used.Suitable for use in various industries including semiconductor and electronics, aerospace, and industrial machinery.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Forzeas™ DA9003 is certified as OK compost HOME. It is a soft polyester with excellent properties suitable for blown, cast film, and profile extrusion and is suitable for food contact applications. Features include good processability in existing LDPE machines, suitability as a sealant layer for flexible packaging, softness similar to LDPE, and suitability for blown film applications such as bags. Application examples include shopping bags, compost bags, sealant layers, and zippers.

BTR8002P is designed as compostable tie resin for Nichigo G-Polymer™ in multilayer structure. It enables customers to produce compostable barrier packaging.

Ertalyte® TX Polyethylene Terephthalate Polyester PET is an unreinforced, semi-crystalline grade that offers superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance, and great chemical and abrasion resistance. This grade is designed to withstand high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.Features:Superior dimensional stabilityExcellent wear resistanceLow coefficient of frictionHigh strength and rigidityOutstanding stain resistanceGreat chemical and abrasion resistanceBenefits:Withstands high pressure and velocity conditionsLow moisture absorption rate ensures mechanical and electrical properties are unaffected by moistureLow wear rate compared to unmodified polyestersIdeal for use in environments with soft metal and plastic mating surfaces where noise abatement is criticalApplications:High pressure and velocity applicationsFood processing and packagingPharmaceuticalOil and gas industriesMechanical precision parts that must endure high loads and wear conditions.

Ketron® TX Polyetheretherketone PEEK, an internally lubricated, EU 10/2011 and FDA compliant grade that offers improved wear and frictional performance over virgin PEEK. This blue-colored material is designed for food and beverage processing, and pharmaceutical applications where extreme performance temperatures, critical tolerances, or low frictional heat are required. Features: Internally lubricated, EU 10/2011 and FDA compliant grade Improved wear and frictional performance over virgin PEEK Suitable for food and beverage processing, and pharmaceutical applications Benefits: Extends wear and part life by lowering the coefficient of friction over standard PEEK Suitable for a wide variety of bearing and wear applications in the 100 to 200°C service temperature range Food contact compliant composition making it suitable for food industry Applications: Food and beverage processing Pharmaceutical industry Bearings and wear applications Ketron® TX PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your food and beverage processing, pharmaceutical industry or bearing and wear applications, Ketron® TX PEEK is the ideal solution.

Forzeas™ DF9006 is certified as OK compost HOME and is a soft polyester with excellent properties suitable for blown and cast films. It is also suitable for food contact applications. Features include good processability in existing LDPE machines and suitability as a sealant layer for flexible packaging as well as for blown film applications such as bags.

Extrulen® UHMW-PE Extruded 1050 stands out with exceptional characteristics, boasting remarkably high notched impact strength, the capacity to absorb substantial energy under elevated stress rates, exceptional wear resistance, and a low coefficient of friction. This material excels in meeting essential performance criteria for challenging industrial or engineering applications, making it a standout choice.

Forzeas™ HF9001 has been certified as OK biodegradable MARINE, with a bio-based carbon content estimated at 90% or more according to ASTM D6866. It is designed for food contact applications, featuring good processability in existing general machines and superior heat resistance compared to other general bioplastics. Examples of its applications include straws for drinking.

Forzeas™ DF9003 is certified as OK compost HOME, with a bio-based carbon content of 50% or more (estimated according to ASTM D6866). Designed for food contact applications, it has good processability in existing general machines and good rigidity comparable to PP. Examples of its application include straws for drinking.

Nichigo G-Polymer™ AVE8077P is a innovative vinyl alcohol copolymer with high MFR that utilizes advanced polyvinyl alcohol modification technology. It offers a range of unique properties, such as excellent water solubility, compostable and biodegradable capabilities, high gas barrier properties and extrudability. This product provides new possibilities to the packaging with using this polymer as a gas barrier layer.

Extrulen® UHMW-PE Extruded 1020 is distinguished by its exceptional features, including remarkably high notched impact strength, the capability to absorb high energy under elevated stress rates, excellent wear resistance, and a low coefficient of friction. These qualities make it a top-performing material for meeting critical performance criteria in demanding industrial or engineering applications.

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Chirulen® UHMW-PE Compression Molded 1020 is a thermoplastic material specifically crafted for long-term orthopedic implants. Boasting exceptional features, such as remarkably high notched impact strength, the capability to absorb high energy at elevated stress rates, outstanding wear resistance, and a low coefficient of friction, this material excels in meeting critical performance criteria. Its superior attributes make it suitable for demanding industrial or engineering applications where reliability and durability are paramount.

Ketron® VMX Food Grade PEEK, an FDA and EU compliant grade that offers extreme dimensional stability, high strength and temperature resistance, and detectability. This material is designed for use in the food processing and packaging industry, where safety and traceability are of the utmost importance. Features: FDA and EU compliant Extreme dimensional stability, high strength and temperature resistance Visual, metal, and x-ray detectable Suitable for food processing and packaging industry Benefits: Can be easily traced by conventional metal and x-ray detection systems, allowing global food processors to safely avoid costly recalls caused by foreign contamination Superior resistance to wear and corrosion make it suitable for applications such as pistons, manifolds, valves, and mixing vessels in the food processing and packaging industry High strength and temperature resistance make it suitable for demanding applications Applications: Food processing and packaging industry Pistons, manifolds, valves, and mixing vessels FDA and EU compliant food applications Ketron® VMX Food Grade PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your food processing and packaging industry applications or need a material suitable for FDA and EU compliant food applications, Ketron® VMX Food Grade PEEK is the ideal solution.

Chirulen® UHMW-PE Compression Molded 1020 HXLPE, a type of ultra-high-molecular-weight polyethylene (UHMWPE), is tailored for applications in the medical field, specifically in orthopedic implants. With a custom physical form, Chirulen® UHMW-PE Compression Molded 1020 HXLPE ensures reliable performance in demanding medical applications, meeting the stringent requirements for orthopedic implants with its notable features.

Semitron® HPV ESd PEEK shapes are specially formulated with specific additives that make them an excellent performer in wear and friction applications where antistatic properties are essential. These shapes are specifically designed for electronic fixture applications that require a high degree of dimensional stability over an extended thermal range, as well as precise machinability.Features:Contains specific additives that provide excellent performance in wear and friction applicationsAntistatic properties for electronic fixture applicationsHigh dimensional stability over an extended thermal rangePrecise machinabilityBenefits:Improved performance in wear and friction applicationsReduced risk of static discharge damage to electronic componentsLong-lasting dimensional stability in high-temperature environmentsEasy to machine for precise applicationsApplications:Electronic fixture applications such as test sockets, contactors, and nestsWear and friction applications where antistatic properties are essentialHigh-temperature applications that require dimensional stability and precise machiningVacuum chamber components and other semiconductor equipment.

Semitron® ESd 490HR Polyetheretherketone PEEK electro static dissipative shapes offer similar physical properties as Semitron® ESd 480 PEEK, but exhibit a higher resistivity value in the 10E8 to 10E10 ohms per square range. Semitron® ESd 490HR PEEK components are thermally stable to temperatures of 490° F / 270° C without degradation, and also possess high structural strength and stiffness combined with excellent dimensional stability. Furthermore, this particular grade is non-sloughing, which is why it is an ideal solution for socket, nest, and contactor manufacturing for test equipment, and other electronic device handling applications.Features:High resistivity value in the 10E8 to 10E10 ohms per square rangeThermally stable to temperatures of 490° F / 270° C without degradationHigh structural strength and stiffnessExcellent dimensional stabilityNon-sloughingBenefits:Ideal for socket, nest, and contactor manufacturing for test equipmentSuitable for electronic device handling applicationsNon-sloughing feature makes it a good option for applications where debris generation is a concernHigh thermal stability and dimensional stability make it suitable for high-temperature and critical applicationsApplications:Socket, nest, and contactor manufacturing for test equipmentElectronic device handling applicationsOther high-temperature and critical applications requiring high resistivity, thermal stability, and dimensional stability.

Semitron® ESd 520HR Polyamide-imide PAI electro static dissipative shapes are a unique and advanced solution for test equipment and device handling applications within the semiconductor and electronics industry. The product possesses the unique ability to resist dielectric breakdown at high voltages, and maintains its performance throughout the 100V to 1000V voltage range while offering the mechanical performance needed to excel in demanding applications.Features:Resists dielectric breakdown at high voltagesMaintains performance throughout the 100V to 1000V voltage rangeHigh strength and heat resistanceSurface resistivity of 10E10 to 10E12 ohms per squareBenefits:High mechanical strength results in longer useful life of the test heads and greater units (tested) per hour.Minimizes the risk of 'leakage' (cross-talk)Retains its surface resistivity at electrical forces greater than 100 volts.Applications:IC Device Testing Fixtures: A test fixture manufacturer recently began using Semitron ESd 520HR that combines electrostatic dissipation (ESD) and high mechanical strength, to make integrated circuit test heads.Test nests, sockets, and contactors for test equipment and other device handling components.Other applications where controlled bleed off of static charges is critical.

Ketron® CM 1030HT Polyetherketone PEEK, a carbon filled material that provides added stiffness at high temperatures. With excellent dimensional stability, chemical and corrosion resistance, this material is ideal for a variety of applications that require strength, stiffness and stability at high temperatures. Features: Carbon filled for added strength and stiffness Provides added stiffness at high temperatures Good dimensional stability Excellent chemical and corrosion resistance Benefits: Improved strength and stiffness at high temperatures Suitable for high temperature applications Good dimensional stability ensures consistent and accurate performance Excellent chemical and corrosion resistance ensures long-lasting performance in harsh environments. Applications: Aerospace industry Automotive industry Medical industry Industrial machinery High-temperature applications Ketron® CM 1030HT PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your aerospace, automotive, medical, industrial machinery or high-temperature applications, Ketron® CM 1030HT PEEK is the ideal solution.

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Chirulen® UHMW-PE Compression Molded 1020E, a type of ultra-high-molecular-weight polyethylene (UHMWPE), is tailored for applications in the medical field, specifically in orthopedic implants. With a custom physical form, Chirulen® UHMW-PE Compression Molded 1020E ensures reliable performance in demanding medical applications, meeting the stringent requirements for orthopedic implants with its notable features.

Forceas™ DA9013 is certified as OK compost HOME. It is a soft polyester with excellent properties, suitable for both blown and cast film. Forceas™ DA9013 is also suitable for food-contact applications. Features include good processability in existing LDPE machines and suitability as a sealant layer for flexible packaging as well as for blown film applications such as bags.

KyronMAX® S-2240 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, and impact resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh impact resistance: able to withstand high impact applications.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and impactEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength, stiffness, and impact resistance is neededHigh impact applications, such as aerospace, automotive and heavy equipment components.KyronMAX® S-2240 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

DURABIO™ D7342 (D7340-810) is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it also has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and is suitable for injection mold.

Nylatron® LIG Polyamide PA6, a self-lubricating, oil-filled nylon that is the perfect solution for industrial applications in the conveying and processing industries. With its unique combination of features, this material offers a range of benefits for a variety of applications.Features:Self-lubricating, oil-filled nylonHigher toughness and limiting pressure velocity when compared to unfilled gradesLow coefficient of frictionBenefits:Enhances load bearing performance and reduces the coefficient of frictionProvides a solution for industrial applications in the conveying and processing industriesApplications:Ideal for use in bushings, bearings, roller wheels, and valve seats and sealsSuitable for use in a wide range of industrial applications where self-lubricating materials are required.

Fluorosint® 207 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added food contact compliance and unique combination of dimensional stability and creep resistance. This material is designed to excel in demanding applications where high performance, reliability and food contact compliance are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceFood Contact Compliant (FDA): safe for use in food and pharmaceutical applicationsHigh dimensional stability and creep resistance: ensures consistent performance over timePTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:Low coefficient of friction, making it ideal for aggressive service bearing and bushing applicationsFood Contact Compliance (FDA), allowing for use in food and pharmaceutical industriesHigh dimensional stability and creep resistance, ensuring consistent performance over timeEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Food and pharmaceutical applications where FDA compliance is requiredLow friction bearing and bushing applications in aggressive service environmentsLower pressure seats and seals, where virgin PTFE failsChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires low friction and dimensional stability in harsh environments.Fluorosint® 207 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added food contact compliance and unique properties, Fluorosint® 207 is an excellent choice for applications in food, pharmaceutical and chemical processing industries.

Semitron® MDS 100 modified Polyetheretherketone PEEK shapes offer a remarkable combination of strength, stiffness, and stability. This grade in particular was developed for use in uncontrolled application environments where a high level of precision is required. Due to this, Semitron® MDS 100 components are often used as test sockets, nests, and fixtures in test and package equipment throughout the semiconductor and electronics industry.Features:Remarkable combination of strength, stiffness, and stabilityDeveloped for use in uncontrolled application environments where a high level of precision is requiredMoisture absorption of 0.10% at 24 hrs. (per ASTM D570)Thermal performance to 210 °C (410 °F)Flexural modulus > 1,400,000 psiBenefits:Ideal for test sockets, nests and fixtures in test and package equipmentSuitable for use in semiconductor and electronics industryCan withstand harsh, uncontrolled environmentsLow moisture absorption ensures dimensional stabilityHigh thermal performance and flexural modulus ensures durability and precisionApplications:Test sockets, nests and fixtures in test and package equipmentOther applications in the semiconductor and electronics industry that require a high level of precision and stability in uncontrolled environments.

BioPBS™ FZ78TM is a bio-based polybutylene succinate (PBS) produced through the polymerization of bio-based succinic acid and 1,4-butanediol. BioPBS™ is a semi-crystalline polyester that offers a combination of softness, flexibility, and favorable properties for fiber applications. With its bio-based nature, this product stands out in terms of biodegradability and compostability, providing a drop-in solution to achieve a better sustainability goal.

Ertalon® LFX PA6 / Nylatron® LFX Polyamide PA6 internally lubricated shapes are specially formulated to withstand the demands of unlubricated, highly loaded, and slowly moving parts applications. This high-performance material offers a unique combination of mechanical properties, including high strength, stiffness, hardness, and toughness, as well as excellent sliding properties, high mechanical damping capabilities, and exceptional electrical insulation properties.Features:Internally lubricatedHigh mechanical strength, stiffness, hardness, and toughnessExcellent sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Can withstand the demands of unlubricated, highly loaded, and slowly moving parts applicationsOffers a unique combination of mechanical propertiesProvides excellent performance in extreme conditionsMinimizes the need for external lubricationApplications:Pharmaceutical, biotechnology, medical, and processing marketsIdeal for use in unlubricated, highly loaded, and slowly moving parts applications such as gears, bearings, and bushingsCan be used in a wide range of industries where high performance, durability, and low maintenance are required.

Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.

Forzeas™ HA9012 represents a breakthrough in environmentally conscious materials for sheet molding applications. This biodegradable and bio-based compound material has achieved certification from OK compost Home and has  80% or more bio-based carbon content calculated with reference to ASTM D6866 standard. Specifically designed for food contact applications, Forzeas™ HA9012 combines sustainability with versatility, making it a responsible choice for a range of uses.

KyronMAX® S-4340 is a hi-temp PPA injection molding compound filled with ultra high strength carbon fiber. No stock shapes offered, only injection molding pellets.

PBST SA916N is designed to be used as a raw material for compostable compounds, especially for film applications. The use of the product as the main raw material for the resin composition allows the product to achieve a high degree of bio-based carbon content as well as high tear and puncture strength. PBST SA916N is for non-food contact applications.

Acetron® AF Blend POM-H - the ultimate solution for enhanced wear resistance in conveying and material handling applications. Made from PTFE-filled Homopolymer, Acetron® AF offers a unique combination of properties that make it stand out from other acetal grades. With a low coefficient of friction and great wear performance in wet environments, this material is perfect for bushings, bearings, electrical components, and rollers.Features:Enhanced wear resistanceLow coefficient of frictionGreat wear performance in wet environmentsLow moisture absorptionBenefits:Operates at higher speeds with reduced wearDimensional stability even in wet environmentsSuitable for food-contact applicationsApplications:Conveying and material handling environmentsBushings, bearings, electrical components, and rollers.