Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 2800.0 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 75.0 | MPa | ISO 178 |
| Tensile Modulus | 2600.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 48.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 2.7 | % | ISO 527 |
| Tensile Elongation at Break | 22.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 75.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 60.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 11.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 4.0 | kJ/m² | ISO 179/1eA |
| Ball Indentation Hardness (H358/30) | 100.0 | MPa | ISO 2039-1 |
| Value | Units | Test Method / Conditions | |
| Density | 1060.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 104.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 89.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 220 - 260 | °C | - |
| Mould Temperature | 50 - 80 | °C | - |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 11.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 220.0 | °C | - |
| MVR Load | 10.0 | kg | - |
| Shrinkage (24h) | 0.4 - 0.7 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-4 h
- 80 °C in an air circulating dryer for 3-6 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.