Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Information (Injection Molding)
- Tribological Properties
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 10400.0 | MPa | ISO 178 |
Flexural Strength | 190.0 | MPa | ISO 178 |
Tensile Modulus | 10700.0 | MPa | ISO 527 |
Tensile Strength at Break | 120.0 | MPa | ISO 527 |
Tensile Elongation at Break | 2.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 40.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Charpy, at -40°C) | 40.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 10.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 7.5 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1380.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
HDT / A (1.8 MPa) | 143.0 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Surface Resistance | max. 300 | Ohm | IEC 62631-3-2 |
Value | Units | Test Method / Conditions | |
Flammability (1.5 mm) | V - 2 | class | UL 94 |
Flammability (3.0 mm) | V - 1 | class | UL 94 |
UL Recognition | yes | - | - |
Yellow Card Available | yes | - | - |
Glow Wire (GWFI, 850°C, 2mm) | Passed | - | DIN EN 60695 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 310 - 330 | °C | - |
Mould Temperature | 80 - 130 | °C | - |
Value | Units | Test Method / Conditions | |
Coefficient of Sliding Friction µ (pv = 3*1 MPa*m/s) | 0.3 | - | ASTM G 137 |
Coefficient of Sliding Friction µH (pv = 3*1 MPa*m/s) | 0.18 | - | ASTM G 137 |
Specific Wear Rate ws (pv = 3*1 MPa*m/s) | 0.28 | E⁻⁶ mm³/Nm | ASTM G 137 |
Linear Wear Rate w (pv = 3*1 MPa*m/s) | 3.1 | µm/h | ASTM G 137 |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 5.5 | cm³/10min | ISO 1133 |
MVR Temperature | 300.0 | °C | - |
MVR Load | 1.2 | kg | - |
Shrinkage (24h) | 0.1 - 0.3 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 120 °C in a dry air (dessiccant) dryer for 2-3 h
- In an air circulatIng dryer 100-120 °C for 4-12 h
- Dependant on moisture content