Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 5400.0 | MPa | ISO 178 |
| Flexural Strength | 96.0 | MPa | ISO 178 |
| Tensile Modulus | 5400.0 | MPa | ISO 527 |
| Tensile Strength at Break | 72.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 1.6 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 13.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 4.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1160.0 | kg/m³ | ISO 1183 |
| Global Warming Potential (GWP) | 1.25 | kg CO₂ eq. | ISO 14040, 14044 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 101.0 | °C | ISO 306 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.05 | % | - |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 220 - 260 | °C | - |
| Mould Temperature | 50 - 80 | °C | - |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 15.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 220.0 | °C | - |
| MVR Load | 10.0 | kg | - |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-4 h
- 80 °C in an air circulating dryer for 3-8 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.