Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus (Dry) | 2000.0 | MPa | ISO 178 |
| Flexural Modulus (Conditioned) | 600.0 | MPa | ISO 178 |
| Flexural Stress (Dry, 3.5% Strain) | 64.0 | MPa | ISO 178 |
| Flexural Strength (Conditioned) | 20.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 2100.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 700.0 | MPa | ISO 527 |
| Tensile Stress at Yield (Dry) | 55.0 | MPa | ISO 527 |
| Tensile Stress at Yield (Conditioned) | 50.0 | MPa | ISO 527 |
| Tensile Elongation at Yield (Dry) | 4.0 | % | ISO 527 |
| Tensile Elongation at Yield (Conditioned) | 25.0 | % | ISO 527 |
| Tensile Elongation at Break (Dry) | 37.0 | % | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 80.0 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
| Impact Strength (Conditioned, Charpy, at 23°C) | 1000.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Dry, Charpy, at -40°C) | no break | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Dry, Charpy, at 23°C) | 40.0 | kJ/m² | ISO 179/1eA |
| Notched Impact Strength (Conditioned, Charpy, at 23°C) | 125.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Dry, Charpy, at -40°C) | 14.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density (Dry) | 1090.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| HDT / A (Dry, 1.8 MPa) | 60.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 220.0 | °C | ISO 11357 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.15 | % | - |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 250 - 270 | °C | - |
| Mould Temperature | 40 - 80 | °C | - |
| Value | Units | Test Method / Conditions | |
| Shrinkage (Lengthwise, 24h) | 1.3 - 1.7 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 1.4 - 1.8 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
- Technical Data
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.