Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus (Dry) | 4000.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 110.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 4300.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 70.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 3.4 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 35.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Dry, Charpy, at 23°C) | 4.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density (Dry) | 1350.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| HDT / A (Dry, 1.8 MPa) | 75.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 220.0 | °C | ISO 11357 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.15 | % | - |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 270 - 290 | °C | - |
| Mould Temperature | 80 - 100 | °C | - |
| Value | Units | Test Method / Conditions | |
| Shrinkage (Lengthwise, 24h) | 1.1 - 1.3 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 1 - 1.2 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.