Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2900.0 | MPa | ISO 178 |
Flexural Strength | 85.0 | MPa | ISO 178 |
Tensile Modulus | 3100.0 | MPa | ISO 527 |
Tensile Strength at Break | 49.0 | MPa | ISO 527 |
Tensile Elongation at Break | 4.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 30.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Charpy, at -40°C) | 20.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 4.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 3.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1290.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 123.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 95.0 | °C | ISO 75-1/-2 |
DSC (Melt Point) | 226.0 | °C | ISO 11357 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.04 | % | - |
Value | Units | Test Method / Conditions | |
Melt Temperature | 250 - 280 | °C | - |
Mould Temperature | 60 - 100 | °C | - |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 20.0 | cm³/10min | ISO 1133 |
MVR Temperature | 260.0 | °C | - |
MVR Load | 2.16 | kg | - |
Shrinkage (Lengthwise, 24h) | 0.8 - 1.2 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 0.7 - 1.1 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 90-115 °C for 2-4 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.