Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2300.0 | MPa | ISO 178 |
Flexural Stress (3.5% Strain) | 85.0 | MPa | ISO 178 |
Tensile Modulus | 2300.0 | MPa | ISO 527 |
Tensile Stress at Yield | 54.0 | MPa | ISO 527 |
Tensile Elongation at Yield | 3.9 | % | ISO 527 |
Tensile Elongation at Break | 15.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 40.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Global Warming Potential (GWP) | 1.42 | kg CO₂ eq. | ISO 14040, 14044 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 120.0 | °C | ISO 306 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 240 - 280 | °C | - |
Mould Temperature | 70 - 100 | °C | - |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 12.0 | cm³/10min | ISO 1133 |
MVR Temperature | 240.0 | °C | - |
MVR Load | 5.0 | kg | - |
Shrinkage (24h) | 0.3 - 0.7 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 100-110 °C for 2-4 h
- In an air circulatIng dryer 100-110 °C for 4-8 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.