Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
- Injection Moulding Processing Conditions
Under certain conditions the increased thermal conductivity must be considered.
Value | Units | Test Method / Conditions | |
Tensile Modulus | 11000.0 | MPa | ISO 527 |
Tensile Strength | 145.0 | MPa | ISO 527 |
Tensile Elongation at Break | 3.5 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 57.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 10.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1170.0 | kg/m³ | ISO 1183 |
Global Warming Potential (GWP) | 5.34 | kg CO₂ eq. | ISO 14040, 14044 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.12 | % | - |
Value | Units | Test Method / Conditions | |
Melt Temperature | 250 - 270 | °C | - |
Mould Temperature | 60 - 100 | °C | - |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 40.0 | cm³/10min | ISO 1133 |
MVR Temperature | 275.0 | °C | - |
MVR Load | 5.0 | kg | - |
Molding Shrinkage (parallel) | 0.1 | % | ISO 294-4, 2577 |
Molding Shrinkage (normal) | 0.5 | % | ISO 294-4, 2577 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80°C in a dry-air dryer for 2-8h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.