Products

MOCOM Compounds ALTECH® PP-H A 4940/100 MR40 is a Polypropylene Homopolymer base polymer with a 40% talcum filler/additive system. It has easy release (demolding) and slip agent features, as well as being heat stabilized. It is commonly used in the automotive, building and construction markets for interior decoration/finishing, gardening tools, injection molded parts, and functional components, such as housings. Pre-drying conditions include a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. Processing Injection molding melt temperature is 200-250°C and the mold temperature is 20-70°C. Ensure that the barrel and mold temperatures are properly set before starting the injection cycle.

MOCOM Compounds ALFATER® XL A50I 3EF0010 is a black Thermoplastic Vulcanisate (PP+EPDM) which is easy to flow and has high surface quality. It offers good weathering, chemical, ozone, hot air and hydrolysis resistance. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profiles, cable ducts, and 2K components. It adheres to Polypropylene Homopolymer, Polypropylene Copolymer, Polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer in general.

MOCOM Compounds ALTECH® ECO PC 2010/121 GF10 IM UV is a polycarbonate-based material with a 10% glass fiber, impact modified filler/additive system and is UV stabilized and easy to release (demolding). It contains recycled material and is suitable for exterior parts in the automotive and various other market segments such as housings and racking/shelving. The material should be stored in a dry, light-protected environment and for processing injection molding, it should be done with a melt temperature of 310-330°C and a mold temperature of 80-130°C.

MOCOM Compounds ALCOM® PC 730/5 UV WT1231-10LDX is a polycarbonate extrusion grade that is UV stabilized and contains a special filler. It is translucent, light scattering, and has high light diffusion, making it ideal for use as lamp covers and other light transparent components in automotive and lighting applications. The melt temperature for extrusion should be in the range of 240-280°C.

MOCOM Compounds ALCOM® PC 740/4 UV GY1416-04LD is a polycarbonate base polymer with a special filler and additive system that is UV stabilized and features translucent, light scattering, and easy flow properties. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016.

MOCOM Compounds ALTECH® PP-H A 2340/750 GF30 GK10 CP is a polypropylene homopolymer with a filler/additive system of 30% glass fibers and 10% glass beads, which is chemically coupled, highly heat stabilized, has a good flow, low warpage, easy release (demolding), slip agent, and processing stabilized. It is suitable for a variety of applications, such as electrical and electronic, automotive and interior decoration/finishing, exterior parts, electrical components, housings, functional components, automotive powertrain parts, and batteries.

MOCOM Compounds ALCOM® PC 740/4 UV CC1320-08LG is a polycarbonate base polymer with a special filler/additive system, UV stabilized, that has excellent light transmission and light scattering properties, as well as good flow. It is suitable for automotive and lighting applications such as lighting, light transparent components, light guides, display elements, and operating elements. It is approved by BQF5404, GMW15702, and GS93016 and is suitable for injection molding with a melt temperature of 270-300°C and a mold temperature of 80-100°C.

MOCOM Compounds ALFATER® XL ECO D50I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) polymer recyclate with good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is used for injection molded and blow molded parts such as seals, sealing lips, handles, racking/shelving, impact protection/shock absorber, protection caps, cable ducts, bellows, and 2K components. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic olefin elastomer, and thermoplastic elastomer general and is used in the automotive, building and construction, electrical and electronic, machinery, and furniture markets.

MOCOM Compounds ALFATER® XL A85E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with natural color, black color, and high viscosity. It has good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the Automotive, building and construction, Machinery, electrical and electronic, and Furniture industries for extruded parts, blow molded parts, and coextrusion. It can be used for profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct, as well as 2K components. Its adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer has been tested generally.

MOCOM Compounds ALCOM® LD2 PC 1000 18033 WT2816-18 is a polycarbonate base polymer that contains a release agent, special filler, and light scattering special features. It is used in lighting, automotive, and lighting-transparent components applications, such as housings, lamps, and operating elements. For injection molding, the recommended melt temperature is 270-310°C and mold temperature is 80-110°C. To ensure optimal results, it is essential to pre-dry the material in a dry air (dessiccant) dryer for 2-4 hours at 120°C and in an air circulating dryer for 4-12 hours at 120°C. The maximum moisture content should not exceed <0.02%.

MOCOM Compounds ALCOM® PC 740/4 CC1122-05LD is a polycarbonate-based polymer with a special filler/additive system that provides high light transmission and light scattering as well as good flow. It is approved by GS93016 and is typically used in automotive and lighting applications such as lamp covers, display elements, and operating elements. For injection molding, the recommended melt temperature is between 270-310°C and the mold temperature should be between 80-110°C. This product should be stored in a dry place and protected from light.

MOCOM Compounds ALTECH® PP-B A 1000/120 UV is a polypropylene heterophasic copolymer with UV stabilized, heat stabilized, and processing stabilized properties. It is suitable for injection molding with a melt temperature of 200-240°C and a mold temperature of 20-70°C and is commonly used for automotive exterior parts and functional components, such as housings. Pre-drying is recommended in a dry air (dessiccant) dryer at 80-120°C for 2-3 h, or in an air circulating dryer at 80-120°C for 2-4 h.

MOCOM Compounds ALCOM® LDDC PC 1000 UV BK1104-20 is a polycarbonate-based polymer with a special filler and UV stabilized additive system, suitable for automotive and lighting applications. It is used for creating light transparent components and black panel technology, with typical applications including display elements and operating elements.

MOCOM Compounds ALCOM® AWL 10 WT1308-05LB is a base polymer composed of Acrylonitrile/Butadiene/Styrene/Copolymer containing 10% special filler. It has special features such as high reflectivity and opacity and is used for automotive and lighting applications, such as light guides and reflectors. To process this polymer, injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C should be used. It should also be stored in a dry, light-protected area.

MOCOM Compounds Alcom® PWL 10/1 WT 41-913LB is an impact-modified polycarbonate designed for use in automotive and lighting applications. It contains 15% special filler that gives it a highly reflective, opaque appearance, making it ideal for light blocking components. It should be stored in a dry area and protected from light.

MOCOM Compounds ALTECH® PP-B A 4915/500 MR15 is a polypropylene heterophasic copolymer with 15% talcum as a filler/additive system. It has high heat stabilization, processing stabilization, and easy release (demolding) characteristics. The melting temperature for injection molding is 200-250°C and the mold temperature is 20-70°C. This material is suitable for automotive, building and construction market segments with typical applications such as housings, fixing elements, functional components and interior decoration/finishing, gardening tools, clothing/fasteners and exterior parts. To ensure optimum performance, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16104 WT2288-09TL is a polycarbonate base polymer filled/additive system with UV stabilizers and light scattering special features for the Automotive and Lighting market segments. Its typical applications include lamp covers, display elements, and operating elements, and it has been approved by GS93016. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours with a maximum moisture content of <0.02%. Processing injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 UV RD1231-08LD is a polycarbonate containing a special filler system with light scattering and high light diffusion properties, as well as being UV stabilized and having good flow. It is suitable for use in the automotive and lighting market segments and is typically used in applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® PC 740/4 UV WT1072-13LD is a polycarbonate base polymer filled with a special filler and UV stabilized for light scattering and high light diffusion to provide easy flow. It is typically used for lamp covers, display elements, and operating elements in the automotive and lighting market and has been approved by GS93016.

MOCOM Compounds ALTECH® PS-HI A 1000/901 BK1261-20 is a polystyrene-based injection-molding grade with easy-release (demolding) and impact properties, making it suitable for use in the automotive, electrical and electronic, and building and construction markets for injection-molded parts such as bezels and housings. Pre-drying conditions involve a dry-air (dessiccant) dryer at 60-80°C for 2-3 hours, or an air-circulating dryer at 60-80°C for 2-3 hours. Processing injection-molding requires melt temperatures of 180-260°C and mold temperatures of 10-70°C. This material should be stored in a cool, dark place to protect it from light.

MOCOM Compounds ALCOM® LD2 MBS 1000 UV 18013 WT1021-18 is a polystyrene copolymer that is translucent, has high light diffusion, light scattering, good flow, processing stabilized, and UV stabilized. It is an injection molding grade suitable for use in the automotive and lighting market segments and is typically used for lamp covers, display elements, and operating elements.

MOCOM Compounds Alcom® LB PC 1000 14073 WT1164-14 is a polycarbonate-based injection molding grade polymer with a special filler/additive system that provides improved surface appearance and easy flow. This material is highly reflective and designed specifically for use in the automotive and lighting markets.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 18041 WT1078-12 is a polycarbonate base polymer with a special filler and UV stabilized additive system. It is translucent, providing high light diffusion and good flow, making it suitable for applications in automotive and lighting markets such as lamp covers, display elements, and operating elements. During processing, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1090-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has translucent, light scattering, high light diffusion, and good flow properties. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements and is approved by GMW15702 and GM3013.

MOCOM Compounds ALCOM® HTC 300/1 WT1056-10LD is a high temperature copolyester base polymer which is pre-dried with 90°C in a dry air (dessiccant) dryer for 4-6 hours to a maximum moisture content of <0,03%. It is equipped with a special filler/additive system for light scattering and high light diffusion, and is intended to be utilized in the automotive and lighting market segments for lighting and light transparent components, such as lamp covers, display elements, and operating elements. The process of injection molding requires a melt temperature of 260-280°C and a mold temperature of 50-70°C. Additionally, the product should be stored in a dry and light-protected area.

MOCOM Compounds ALCOM® PC 740/4 UV WT1257-04LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features light scattering and high light transmission. It is used in automotive and lighting applications such as lamp covers, display elements, and operating elements, and is approved by GS93016. For optimal performance, injection molding should be done at a melt temperature of 270-310°C and mold temperature of 80-110°C. It is important to follow these instructions.

MOCOM Compounds ALTECH® ECO PA6 4230/100 GF10 MR20 is a heat-stabilized polyamide 6 blend with 10% glass fibers and 20% mineral. Pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. It is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C. It is typically used in the automotive market for engine covers and housings, and should be stored in a dry and light-protected environment not exceeding 30°C to ensure optimal properties.

MOCOM Compounds ALTECH® PP-H B 4930/506 MR30 is a Polypropylene Homopolymer that is pre-dried in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. It contains 30% talcum and is processing stabilized, heat stabilized, and easy to release (demolding) with a slip agent. It is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is suitable for use in the Automotive, Machinery and various other markets and is typically used in the production of dashboard/instrument panels, display elements, and various other fixtures/fittings, interiors, and various applications.

MOCOM Compounds ALCOM® PC 740/4 BL1411-07LD is a polycarbonate-based compound with a special filler/additive system suitable for Automotive and Lighting applications. It requires pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-4 h and 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. Typical applications include lamp covers, display elements, and operating elements. It is approved under GS93016 and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It should be stored in a dry place and protected from light, with the lid firmly secured after use.

MOCOM Compounds ALCOM® PC 740/4 GY1156-04LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering and high light diffusion properties. It is used primarily in the automotive and lighting industry for applications such as lamp covers, display elements, and operating elements. It is approved under GS93016 and must be processed using an injection molding process with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALTECH® PP-B A 2030/150 GF30 CP is a heterophasic copolymer made of polypropylene and 30% glass fibers, coupled together chemically and easy to remove. It is heat and processing stable, and is suitable for injection molding with melt temperatures of 200-250°C and mold temperatures of 20-70°C. It is most commonly used for automotive purposes such as functional components, powertrain parts, housings, fixing elements, interior and exterior decoration and finishing. To ensure optimal results, it should be pre-dried in a dry air (dessiccant) dryer or air circulating dryer at temperatures of 80-120°C for 2-4 hours.

MOCOM Compounds ALCOM® AWL 109/15 UV WT1217-11LB is a base polymer of acrylonitrile/butadiene/styrene/copolymer modified with polycarbonate, containing 15% special filler and special features of being highly reflective, opaque, UV stabilized, and highly heat stabilized. It is intended for use in the automotive and various market segments, primarily for lighting and light blocking components such as light guides and reflectors.

MOCOM Compounds ALCOM® PC 740/4 BL1355-06LD is a polycarbonate base polymer with a special filler/additive system providing translucent, light scattering, and good flow properties. It is suitable for automotive, lighting, and light transparent components such as lamp covers, display elements, and operating elements, and has been approved by GS93016. The recommended processing injection molding temperature is 270-310°C, with a mold temperature of 80-110°C. For optimal performance, this material should be stored in a dry, light-protected environment.

MOCOM Compounds ALFATER® XL A75I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer used in a variety of markets such as automotive, building and construction, electrical and electronic, machinery, and furniture. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is typically used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components.

MOCOM Compounds ALFATER® XL A70I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) with natural color, black and has good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for injection molding with a melt temperature of 195-230°C and a mold temperature of 10-60°C, making it suitable for a wide range of applications, such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALCOM® LIR PC 1000 UV 14099 BK1203-14 is a polycarbonate base polymer with a UV stabilized filler/additive system and special features of IR-transparency. It is suitable for applications in the automotive and lighting markets, such as lamp covers, display elements, and operating elements. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C. The product should be stored in a dark place.