Products

MOCOM Compounds ALTECH® PA6 B 1000/170 is a polyamide 6 base polymer that solidifies quickly and is easy to demold. It is heat and processing stabilized, making it suitable for injection molding with melt temperatures between 250-270°C and mold temperatures between 40-80°C. This polymer is suitable for use in the automotive, machinery, building and construction, and sport and leisure markets. It can be used for injection molded parts, clothing/fasteners, and for housings and functional components.

MOCOM Compounds ALCOM® PC 740/4 GY1111-09LD is a polycarbonate base polymer with a special filler/additive system, colored similar to RAL 7015, featuring light scattering and good flow. It is intended for use in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALFATER® XL A65I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) polymer suitable for injection molding. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. Its market segment includes automotive, building and construction, electrical and electronic, machinery, and furniture, and its applications include injection molded parts, seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connector, and 2K components.

MOCOM Compounds ALCOM® PC 740/4 GY1156-04LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering and high light diffusion properties. It is used primarily in the automotive and lighting industry for applications such as lamp covers, display elements, and operating elements. It is approved under GS93016 and must be processed using an injection molding process with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 BL1355-06LD is a polycarbonate base polymer with a special filler/additive system providing translucent, light scattering, and good flow properties. It is suitable for automotive, lighting, and light transparent components such as lamp covers, display elements, and operating elements, and has been approved by GS93016. The recommended processing injection molding temperature is 270-310°C, with a mold temperature of 80-110°C. For optimal performance, this material should be stored in a dry, light-protected environment.

WIC PA6 15 BK IM is a heat aging stabilized, impact modified Polyamide 6 base polymer with 15% carbon fiber filler in black color, suitable for Automotive and Sport market segments. Its pre-drying conditions are 80°C in a dry-air dryer for 2-8h, depending on moisture content up to 0.12% max. moisture content. The processing conditions are injection molding with melt temperature 250-270°C and mold temperature between 60-100°C. The increased thermal conductivity must be considered under certain conditions. It should be stored in a dry, light-protected environment and used within six months after opening the package.

MOCOM Compounds Alcom® DET PP FC 8010 14084 is a detectable polypropylene base polymer with a 10% metal filler/additive system, designed for injection-molded parts in food contact packaging applications. It is suitable for the production of fixtures/fittings, cable ties, caps/closures, and other injection-molded components.

MOCOM Compounds ALTECH® PP-B A 4430/100 MR30 is a polypropylene heterophasic copolymer with 20% chalk and 10% talcum. It is heat stabilized and has easy release (demolding) and processing stabilized characteristics. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This material is applicable in the building and construction, sport and leisure markets and is typically used for housings and functional components. It should be stored in a dry, light-protected environment, not above 30°C, for optimal results.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1100-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and translucent, light scattering, and has high light diffusion. It has easy flow properties and is suitable for automotive, lighting, and light transparent components. Typical applications include lamp covers, display elements, and operating elements. For processing injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used.

MOCOM Compounds Alcom® DET PA66 FC 8010 17047 BL2296-09 is a detectable polyamide 66 base polymer with a 10% metal filler/additive system, specially designed for injection-molded parts in food contact packaging applications. It is suitable for the production of fittings, cable ties, caps/closures, and other injection-molded components.

MOCOM Compounds ALTECH® PP-H A 4818/100 MR18 is a Polypropylene Homopolymer with a Filler/Additive System of chalk, which features detergent solution stabilization, processing stabilization, and easy release (demolding). Processing Injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is suitable for building and construction applications and is often used in domestic appliances, housings, and functional components.

MOCOM Compounds ALTECH® PA6 A 2003/712 GF3 IM UV is a polyamide 6 with a 3% glass fiber filler/additive system. It has been impact modified, fast solidifying, has easy demolding and is UV and processing stabilized. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C and is used in the automotive, machinery, building and construction and sport and leisure market segments. Typical applications include functional components and it should be stored dry, protected from light and not above 30°C.

MOCOM Compounds ALCOM® PC 740/4 BL1411-07LD is a polycarbonate-based compound with a special filler/additive system suitable for Automotive and Lighting applications. It requires pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-4 h and 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. Typical applications include lamp covers, display elements, and operating elements. It is approved under GS93016 and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It should be stored in a dry place and protected from light, with the lid firmly secured after use.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15003 CC1005-15 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized, providing high light transmission and light scattering, as well as high light diffusion, dependent on wall thickness and easy flow. It is suitable for automotive and lighting market segments, for applications such as lamp covers, display elements, and operating elements. Processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. This product is approved by GS93016 and should be stored in its original packaging.

MOCOM Compounds ALCOM® CFX ASA 1000 UV 15116 SV1163-15MC is a pre-drying conditions acrylonitrile/styrene/acrylate/copolymer with UV stabilized metallic effect, which has low tendency to flow lines and is easy to flow. It is used in electrical and electronic, building and construction, and sport and leisure applications and is an injection molding grade. The melt temperature for processing injection molding is 240-280°C and the mold temperature is 40-80°C.

WIC PP 20 N is a polypropylene with 20% carbon fiber filler, suitable for use in the automotive and sports markets. Prior to processing, the material must be dried in an air-circulating dryer at 80°C for 2-4 hours, with a maximum moisture content of 0.10%. During processing, injection molding is recommended with a melt temperature range of 210–260°C and a mold temperature range of 30–60°C. The material comes in a natural color with a carbon optic and has heat-age stabilization as its special feature.

MOCOM Compounds ALFATER® XL D50I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, and furniture applications, and is used for injection molded parts such as seals, sealing lips, handles, impact protectors/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® ABS FC 1000/106 BK1280-05 is a pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer with easy flow, processing stabilized and injection molding grade features. It has a maximum moisture content of less than 0.20%. The recommended pre-drying conditions are 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content. This material can be used in various markets, such as the food processing industry, and is suitable for applications such as domestic appliances and injection molded parts with food contact. It is ideal for food industry applications that require a low absorption rate.

MOCOM Compounds ALCOM® LIR PC 1000 UV 14099 BK1203-14 is a polycarbonate base polymer with a UV stabilized filler/additive system and special features of IR-transparency. It is suitable for applications in the automotive and lighting markets, such as lamp covers, display elements, and operating elements. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C. The product should be stored in a dark place.

MOCOM Compounds ALTECH® ABS A 1000/172 UV is a acrylonitrile/butadiene/styrene/copolymer with good flow, processing stabilized and UV stabilized, suitable for information technology, electrical and electronic and telecommunications applications including display elements, keyboards, and other various applications. For processing, injection molding with a melt temperature of 200-240°C and a mold temperature of 50-80°C is recommended. Pre-drying conditions should be 80°C in an air circulating dryer for 3-6 hours or 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content, with a maximum moisture content of 0.20%.

MOCOM Compounds ALFATER® XL A75I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer used in a variety of markets such as automotive, building and construction, electrical and electronic, machinery, and furniture. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is typically used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components.

MOCOM Compounds ALCOM® ABS 530/22 SV1287-04MCS is a Base Polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with a metallic effect color. It has good flow and is typically used to make housings for domestic appliances. Pre-drying Conditions include 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours depending on moisture content. For processing Injection molding, the melt temperature should be between 220-260°C and the mold temperature should be between 50-80°C.

MOCOM Compounds ALFATER® XL A55I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) suitable for pre-drying conditions in a dry air (dessiccant) dryer with temperatures of 70-80°C for 2-4 hours with a maximum moisture content of <0.10%. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is used mainly in the injection molding process with melt temperatures of 195-230°C, mold temperatures of 10-60°C, high injection speed, and back pressure (hydraulic) >5 bar and holding pressure 50-70% of injection pressure. It is used in automotive, building and construction, electrical and electronic, machinery, and furniture applications for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners, and connectors, 2K components.

MOCOM Compounds ALCOM® PC 740/4 UV OR1075-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light diffusion, and translucency similar to RAL 2003. It is UV stabilized and approved by GS93016, suitable for automotive and lighting segment applications such as lamp covers, display elements, and operating elements. For injection molding, the suggested melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 GY1122-04LD is a polycarbonate base polymer with a special filler/additive system, featuring light scattering and high light diffusion, as well as good flow. It is used in automotive and lighting applications for lighting, light transparent components such as lamp covers, display elements, and operating elements. It has GS93016 approvals and is recommended to be pre-dried before injection molding processing at 270-310°C with a mold temperature of 80-110°C for best results.

MOCOM Compounds ALCOM® PC 740/4 UV WT1139-11LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and provides a translucent, light scattering, and high light diffusion. It is suitable for applications such as lamp covers, display elements, and operating elements and is approved by GS93016. The melt temperature for injection molding should be between 270-310°C, and the mold temperature should be between 80-110°C.

MOCOM Compounds ALTECH® ECO PC 2015/509 GF15 is a polycarbonate containing 15% glass fibers, designed for easy release (demolding). It is suitable for use in electrical and electronic, building and construction segments and is typically applied for domestic appliances, electrical components, and various other applications. It should be processed using injection molding with a melt temperature of 280-300°C and a mold temperature of 80-100°C.

MOCOM Compounds CELLIDOR® B 631-10S is a base polymer of CelluloseAcetateButyrate with a filler/additive system of phthalate-free plasticiser. It is used in the market segment of sport and leisure and its application area is extruded parts and profiles. Typical applications are protection-strip and grease reservoirs. Processing injection molding - extrusion melt temperature is 190-235°C, with an inlet temperature of 40-80°C.

MOCOM Compounds ALCOM® PC 740/4 UV RD1207-08LD is a light scattering and UV stabilized polycarbonate with a special filler and a maximum moisture content of <0.02%. It is designed for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016. Injection molding should take place at a melt temperature of 270-310°C and a mold temperature of 80-110°C. Pre-drying conditions should be applied at 120°C in a dry air (dessiccant) dryer for 2-4 h or in an air circulating dryer for 4-12 h to ensure optimal performance.

MOCOM Compounds ALCOM® PC 740/4 WT1245-04LD is a polycarbonate-based injection molding grade with a special filler/additive system for light scattering and high light transmission, designed for automotive lighting and light transparent components such as lamp covers, display elements, and operating elements. To ensure quality, the product must be pre-dried to a maximum moisture content of <0.02%, with conditions of 120°C in a dry air (dessiccant) dryer for 2-4 h and 120°C in an air circulating dryer for 4-12 h.

MOCOM Compounds ALCOM® PC 740/48 CC1124-13LD is a polycarbonate base polymer with a special filler/additive system providing light scattering, high light transmission, and easy flow. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements. For optimum results, the injection molding melt temperature should be between 270-310°C, and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 UV GY1118-12LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has a translucent, light scattering, and high light diffusion. It is used for automotive and lighting applications such as lamp covers, display elements, and operating elements with approvals of GS93016. The processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALFATER® XL A70I 4PA0010 is a thermoplastic vulcanisate (PP+EPDM) which is available in natural, bright inherent colors and black. It has adhesion-modified properties to polyamide, as well as easy flow, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. The black color also passes weathering dry and hot (Kalahari, PV3929) as well as weathering moist and hot (Florida, PV3930). Its typical application areas include automotive, building and construction, electrical and electronic, machinery, and furniture, and it is used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, functional components, casters, and 2K components.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16100 WT1125-16 is a polycarbonate-based resin containing a special filler and UV stabilized additive system for improved translucence, light scattering properties and flow. Suitable for injection molding, it has a melt temperature range of 270-310°C and mold temperatures of 80-110°C and is approved by GS93016. This resin is used in the automotive and lighting industries for applications such as lamp covers, display elements and operating elements.

WIC PP 15 BK is a polypropylene base polymer filled with 15% carbon fiber and colored black. Its processing conditions involve injection molding with a melt temperature of 210-260°C and a mold temperature of 30-60°C. It has special features such as heat aging stabilization and is suitable for the Automotive and Sport market segments. Under certain conditions, the increased thermal conductivity needs to be considered.

WIC PP 15 N is a base polymer of Polypropylene reinforced with 15% carbon fiber in natural (carbon optic) color. It features heat aging stabilization, making it suitable for automotive, sport and other markets. The pre-drying conditions require it to be heated to 80°C in an air circulating dryer for 2-4h, dependent on the moisture content, with a maximum moisture content of 0.10%. The processing conditions require injection molding with a melt temperature between 210-260°C, and a mold temperature between 30-60°C. Under certain conditions, the increased thermal conductivity must also be taken into consideration for optimal performance.