Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
Properties
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Other Properties
Value | Units | Test Method / Conditions | |
Tensile Stress at Break at 23°C | 190 | MPa | ISO 527-1/2 |
Tensile Stress at Break (23°C) | 190 | MPa | ISO 527-1/2 |
Tensile Strain at Break at 23°C | 4.5 | % | ISO 527-1/2 |
Tensile Strain at Break (23°C) | 4.5 | % | ISO 527-1/2 |
Tensile Elastic modulus 23°C (1 mm/min) | 10700 | MPa | ISO 527-1/2 |
Tensile Elastic Modulus (23°C, 1mm/min) | 10700 | MPa | ISO 527-1/2 |
FLEXURAL Elastic Modulus at 23°C | 175 | MPa | ISO 178 |
Izod Impact Strength Unnotched at 23°C | 65 | kJ/m2 | ISO 180/1U |
Izod Impact Strength Unnotched (23°C) | 65 | kJ/m2 | ISO 180/1U |
Izod Impact Strength Notched at 23°C | 11 | kJ/m2 | ISO 180/1A |
Izod Impact Strength Notched (23°C) | 11 | kJ/m2 | ISO 180/1A |
Value | Units | Test Method / Conditions | |
VICAT Softening Point (50 N - 50°C/h) | 235 | °C | ISO 306/B |
VICAT Softening Point (50N, 50°C/h) | 235 | °C | ISO 306/B |
Value | Units | Test Method / Conditions | |
Density at 23°C | 1.37 | g/cm3 | ISO 1183 |
Density (23°C) | 1.37 | g/cm3 | ISO 1183 |
Drying Temperature | 80 | °C | - |
Drying Time | 4 | h | - |
Melt Temperature | 270 - 290 | °C | - |
Mould Temperature | 90 - 120 | °C | - |
Value | Units | Test Method / Conditions | |
Burning Behaviour | HB | - | UL94 |
Regulatory & Compliance
- Certifications & Compliance