company tower banner
NextGen Adhesives Company Logo
NGAC G907-52 is a room temperature curable epoxy adhesive with a low viscosity. This two-part system has a strong adhesion to glass, ceramics, most metals, and plastics.

Product Type: 2K (2 component) Adhesive, Epoxy Adhesive

Compatible Substrates & Surfaces: Ceramic, Glass, Metal, Plastics

Cure Method: Air Dry

Chemical Family: Epoxy & Epoxy Derivatives

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Advantages

NGAC G907-52 features the following characteristics that enable ease of use.

Applications & Uses

Compatible Substrates & Surfaces
Cure Method
Applications

NGAC G907-52 was designed for industrial bonding, casting and potting applications requiring good flowability, surface wetting and minimal shrinkage upon cure.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Mixed Viscosity4000.0cps-
Thixotropic Index1.3--
Specific Gravity1.58--
Mix Ratio (Weight, R/H)100/14--
Hardness85.0Shore D-
Operating Temperature-60 to +145°C-
CTE3.5e-05cm/°C-
Volume Resistivity (25°C)4.0e+16ohm-cm-
Volume Resistivity (100°C)400000000000000.0ohm-cm-
Thermal Conductivity (W-m-K)0.5W/M/°K-
Glass Transition Temperature80.0--
Lap Shear (Alum to Alum)3000.0psi-
Dielectric Strength510.0volts/mil-
Dielectric Constant (1KHz, 25°C)4.1--
Dissipation Factor (1KHz, 25°C)0.01--
Heat Distortion Temperature102.0--
NASA OutgassingPasses--

Technical Details & Test Data

Cure Schedule
Temperature 25°C 65°C
Time 24 hour 4 hours

Storage & Handling

Pot Life
30.0