Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
- Composition
ACTIVE INGREDIENT: Clofentezine: 3,6-bis (2-chlorophenyl)-1,2,4,5-tetrazine * 42.00% OTHER INGREDIENTS 58.00% TOTAL 100.0% *Contains 1 pound of active ingredient per quart.
Features & Benefits
- Product Highlights
Notavo is a suspension concentrate containing 1 pound of clofentezine per quart.
- Common Name: Clofentezine
- Class: Tetrazines
RESTRICTED ENTRY INTERVAL (REI) AND SIGNAL WORD
- REI = 12 hours
- Signal Word = CAUTION
- Advantages
- Long-term residual activity
- Active against eggs and immature stages
- Virtually harmless to predacious mites and beneficial insects
- Reduced-risk pesticide classification
- Stable across a wide range of pH tank solutions
- Magenta color aids in detecting proper spray coverage
- Pest Controlled
- Two spotted spider mite
- Pacific spider mite
- McDaniel spider mite
- European red mite
- Yellow spider mite
- Product Info
NOTAVO may be used on ornamental plants (including conifers and nonbearing trees and vines, carnations, chrysanthemums, scheffleras, and roses) in greenhouses, saran and shade houses, outdoor container, and field grown nursery stock for management of plant-feeding mites. NOTAVO is highly active on mite eggs and early mite stages. It has shown activity and persistence up to 45 days after application. Proper timing of application based on the utilization of scouting may delay or eliminate the need for subsequent applications of other miticides.
Applications & Uses
- Markets
- Applications
- Application Technique
- Insecticide Target Species
- Mode Of Action
Notavo is effective on eggs and immature stages of two-spotted spider mites and other common mites through both contact and ingestion. Notavo works by inhibiting the growth of mites. Notavo is an ideal fit in a miticide resistance management strategy
- Use Sites
Notavo may be used for mite management on commercial ornamental plants in greenhouses, saran and shade houses, outdoor containers and field-grown nursery stock
- Application Rates
Notavo can be combined with most commonly used pesticides and is stable across a wide range of pH. For broad-spectrum control, Notavo may be tank mixed with most other miticide/insecticide products. Notavo and various tank mix combinations, including spreader stickers and adjuvants, have not been tested on all plant species and the many varieties of each. Tank mix combinations should be trialed on a smallscale basis before any large-scale use.
OHP Products Chemical Class MOA Group Residual REI Floramite® SC Carbazate UN 7 to 14 days 12 Notavo® Tetrazines 10A 21 days 12 Sirocco Carbazate + Glycoside 6 + UN 7 to 14 days 12 Shuttle® O Napthoquinone derivative 20B 14 to 28 days 12 Triact® 70 Clarified hydrophobic extract of neem oil M 3 to 7 days 4 OHP Recipe for Success on Controlling Spider Mites
Application Rate per 100 gallons Rate per gallon Rate per gallon metric Remarks Notavo® 2 to 8 fl. oz. 1/8 tsp to 1/2 tsp 6 mL to 2.4 mL Effective on immature stages Floramite® SC 4 to 8 fl. oz. 1/8 tsp to 1/2 tsp 1.3 mL to 2.6 mL Rapid activity Sirocco 3 to 4 fl. oz. 3/16 tsp to 3/8 tsp 1.3 mL to 2.6 mL Translaminar activity Shuttle® O 6.4 to 12.8 fl. oz. 2/5 tsp to 4/5 tsp 2 mL to 4 mL Contact – rapid activity Triact® 70** Alternative treatment and/or tank mix 1/2 to 1 gal 33/4 tsp to 71/2 tsp 15.75 mL to 37.5 mL Use the lower rate in greenhouses - Resistance Management
When used as directed, Notavo is effective on a wide variety of mite species. Notavo shows efficacy on most mite life cycle stages. Users should not make successive applications of Notavo. Users should apply Notavo as part of a resistance management strategy program that includes rotation with other miticides with different modes of action
RESTRICTIONS & LIMITATIONS
- Notavo should not be used through any type of irrigation system.
- Do not apply Notavo more than once per crop cycle in greenhouse, saran and shade house culture.
- Directions For Use
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.
- Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. Hand harvesting of flowers is restricted until 7 days after application
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is:
- Coveralls
- Chemical-resistant gloves made of barrier laminate, butyl rubber, nitrile rubber, neoprene rubber, polyvinyl chloride (PVC), or Viton
- Shoes plus socks
Safety & Health
- Personal Protective Equipment (Ppe)
Applicator and other handlers must wear:
- long-sleeved shirt and long pants
- shoes plus socks
- chemical resistant gloves made of barrier laminate, butyl rubber (> 14 mils), nitrile rubber (> 14 mils), neoprene rubber (>14 mils), polyvinyl chloride (> 14 mils), or Viton (> 14 mils)
- Precautionary Statements
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION Avoid contact with skin, eyes, or clothing. Wash thoroughly with soap and water after handling. Remove contaminated clothing and wash before reuse.
- User Safety Recommendations
- Users should wash hands before eating, drinking, chewing gum, or using the toilet.
- Users should remove clothing/PPE immediately if pesticide gets inside. Then, wash thoroughly and change into clean clothing.
- Users should remove PPE immediately after handling this product. Wash the outside of gloves before removing them. As soon as possible, wash thoroughly and change into clean clothing.
- Environmental Hazards
For terrestrial uses, do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. Do not apply within 100 feet of lakes, reservoirs, rivers, permanent streams, marshes, natural ponds, estuaries, and commercial fish farm ponds. Do not apply when weather conditions favor drift from treated area. Do not allow spray to drift off of crop, especially when spraying outer rows. Always direct spray into the crop. Do not contaminate water when disposing of equipment washwaters.
IMPORTANT — Read the entire Directions for Use and Disclaimer of Warranties before using this product.
Packaging & Availability
- Packaging Type
- Packaging
- 16 fluid ounce (pint) container,
- 8 per case
Storage & Handling
- Storage And Disposal
PROHIBITIONS: Do not contaminate water, food, or feed by storage or disposal.
PESTICIDE STORAGE: Store in original container, tightly closed, in a safe place.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.
CONTAINER DISPOSAL: Nonrefillable Container (five gallons or less): Nonrefillable container. Do not reuse or refill this container. Offer for recycling, if available. Clean container promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake container for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Offer for recycling or reconditioning; or puncture and dispose of container in a sanitary landfill, or by incineration; or, if allowed by State and local authorities, by burning. If burned, stay out of smoke.