Knowde Enhanced TDS
Identification & Functionality
- CAS No.
- 7440-57-5
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Benefits
- Coating and patterning by inkjet, aerosol or slot-die printing
- Low temperature process
- Printed on polymers, metals and fabrics
- No solid or liquid waste
- Material saving
- Cost-efficient solution
- Pure gold layers, no additives, good biocompatibility
- Biocompatible and non-toxic
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Applications of the Ink
- Sensors
- Electrodes
- Medical devices
- Calalysis
- Other sensitive devices
Properties
- Physical Form
- Appearance
- Clear Yellow Liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Conductivity (bulk, Cured Film) | 30 – 45 | % | |
Layer Thickness (Cured Film) | 100 - 500 | nm | |
Sheet resistance (Cured Film) | 1 - 3 | Ω/sq | |
Acidity Ink (pH) | min. 2 | - | - |
Viscosity (Ink) | 3 - 20 | cP | |
Layer Width (Cured Film) | min. 50 | μm |
Technical Details & Test Data
- OrelTech Aurum gold coated ECG electrodes
- OrelTech Aurum gold electrode on fabric
- Curing Conditions
- Curing time: 10-15 minutes.
- Curing apparatus: Cold plasma instrument with a low pressure chamber.
- Curing temperature: Temperature in the plasma chamber does not exceed 70 ⁰C. No additional heating is needed. That temperature can be lowered to room temperature using a temperature-controlled plasma chamber.
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Shelf Life
- 12 months
- Directions for Use and Storage
- Storage: Inks can be stored in closed containers for up to 12 month in dry, dark conditions.
- Clean-up: Materials can be cleaned up using alcohols and ketones, preferably isopropanol.
- Pre-treatment: In some cases, to ensure better wettability and/or adhesion, the substrate material must be pre-treated prior to ink application.
- Handling: Please note that the ink is acidic (pH > 2). Use gloves and protective goggles, avoid direct skin contact. In some cases (fabric substrates) there is a need to rinse the substrate after the metallization process.