Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Compatible Substrates & Surfaces
Properties
- Color
- Appearance
- Yellow liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Base Compound (Resin) | Ethyl cyanoacrylate | - | - |
| Viscosity | 180 - 220 | cPs | - |
| Specific Gravity | 1.05 | - | - |
| Flash Point | 170 - 200 | °F | Tagliabue closed cup |
| Value | Units | Test Method / Conditions | |
| Average Set Time (Full Cure 24 hours, Metal) | 8 - 10 | seconds | - |
| Average Set Time (Full Cure 24 Hours, Plastic) | 5 - 10 | seconds | - |
| Average Set Time (Full Cure 24 Hours, Rubber) | 3 - 6 | seconds | - |
| Average Strength (Steel) | 22.0 | N/mm² | - |
| Value | Units | Test Method / Conditions | |
| Softening Temperature | 300 | °F | - |
| Service Temperature | -65 to 180 | °F | - |
| Hardness Barcol | 65 | - | - |
| Dielectric Constant (at 1 MHz) | 3.33 | - | - |
| Specific Resistance | 8.6x10² | Ω-cm | - |
| Tensile Shear Strength | 2500 | psi | - |
| Gap Filling | 0.008 | inches | - |
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum < 20 seconds Steel to Steel 30 to 50 seconds Phenolic to Phenolic < 40 seconds Polycarbonate to Polycarbonate 50 to 70 seconds Rubber to Rubber < 10 seconds
Storage & Handling
- Shelf Life
- 1 Year