Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Reinforcement Material
- Technologies
Features & Benefits
- Materials Features
- Key Benefits
- Very good resistance to deformation under load
- Very high wear resistance in dry and greasy environments
- Resistant in corrosive environments
- Ideal for hydrated environments
- High heat insulation
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
Properties
- Mechanical Properties
- Physical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Tensile Strength at Break | 110 - 210 | Kg/cm² | D638 |
Compressive Stress (%1 Deformation, 23°C) | 85 - 110 | Kg/cm² | D695 |
Total Deformation | 2.9 - 4.8 | % | D621 |
Permanent Deformation | 0.4 - 2.1 | % | D621 |
Elongation at Break (23°C) | 70 - 110 | % | D638 |
Impact Resistance (Izod, Notched) | 8.5 - 9 | Kj/m² | D256 |
Hardness | 65 - 68 | Shore D | D2240 |
Total Deformation Under Weight (10 kg/cm² Load, 150°C, 24 hours) | 1.8 - 2 | % | - |
Total Deformation Under Weight (50 kg/cm² Load, 150°C, 24 hours) | 8 - 9 | % | - |
Value | Units | Test Method / Conditions | |
Coefficient of Friction (Static) | 0.11 | - | - |
Coefficient of Friction (Dynamic) | 0.12 | - | - |
PV Limits (3 m/min) | 220 - 230 | kg.cm³.min | - |
PV Limits (30 m/min) | 250 - 400 | kg.cm³.min | - |
PV Limits (300 m/min) | 300 - 450 | kg.cm³.min | - |
Value | Units | Test Method / Conditions | |
Density (23°C) | 2.05 - 2.15 | g/cm³ | D792 |
Value | Units | Test Method / Conditions | |
Coefficient of Linear Thermal Expansion (25°C-100°C, [x10^-5]) | 9.5 -10 | °C-1 | D696 |
Coefficient of Linear Thermal Expansion (25°C-100°C, [x10^-5]) | 11 - 12 | °C-1 | D696 |
Coefficient of Linear Thermal Expansion (25°C-100°C, [x10^-5]) | 13 - 15 | °C-1 | D696 |
Heat Conductivity (30°C, [x10^-4]) | 15 - 17 | Cal/cm.sn.°C | - |
Maximum Allowable Service Temperature in Air - Continuous | 270 | °C | - |
Maximum Allowable Service Temperature in Air - Continuous | -260 | °C | - |
Value | Units | Test Method / Conditions | |
Surface Resistivity (23°C, RH 50%) | min. 10^7 | Ohm | D257 |
Surface Resistivity (23°C, 50% RH) | min. 10^7 | Ohm | D257 |
Volume Resistivity (23°C) | min. 10^3 | Ohm-cm | D257 |