Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Composite Materials Functions
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Processing Method
Injection Molding
- Additive
Mold Release
Features & Benefits
- Materials Features
- Features
- General Purpose
- Good Mold Release
- Low Flow
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Composites Processing Methods
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Information (Injection Molding)
- Impact Properties
- Hardness
Value | Units | Test Method / Conditions | |
Density | 1.2 | - | ASTM D792 |
Melt Mass Flow Rate (at 300°C, 1.2 kg) | 5.0 - 10 | g/10 min | ASTM D1238 |
Molding Shrinkage (at 0.125 in, Flow) | 5.0E-3 to 7.0E-3 | in/in | ASTM D955 |
Specific Gravity | 1.2 | - | ASTM D792 |
Value | Units | Test Method / Conditions | |
Tensile Strength (at Yield, 0.125 in) | 9000 | psi | ASTM D638 |
Tensile Strength (at Break, 0.125 in) | 10500 | psi | ASTM D638 |
Tensile Elongation (at Yield, 0.125 in) | 7 | % | ASTM D638 |
Tensile Elongation (at Break, 0.125 in) | 130 | % | ASTM D638 |
Flexural Modulus (at 0.125 in) | 335000 | psi | ASTM D790 |
Flexural Strength (at 0.125 in) | 14000 | psi | ASTM D790 |
Value | Units | Test Method / Conditions | |
Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) | 280 | °F | ASTM D648 |
Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) | 270 | °F | ASTM D648 |
Relative Thermal Index Electrical Property (at 0.03 in) | 176 | °F | UL 746 |
Relative Thermal Index Electrical Property (at 0.06 in) | 257 | °F | UL 746 |
Relative Thermal Index Electrical Property (at 0.12 in) | 257 | °F | UL 746 |
Relative Thermal Index Impact Property (at 0.03 in) | 176 | °F | UL 746 |
Relative Thermal Index Impact Property (at 0.06 in) | 239 | °F | UL 746 |
Relative Thermal Index Impact Property (at 0.12 in) | 239 | °F | UL 746 |
Relative Thermal Index Strength Property (at 0.03 in) | 176 | °F | UL 746 |
Relative Thermal Index Strength Property (at 0.06 in) | 257 | °F | UL 746 |
Relative Thermal Index Strength Property (at 0.12 in) | 257 | °F | UL 746 |
Vicat Softening Temperature | 310 | °F | ASTM D1525 ² |
Value | Units | Test Method / Conditions | |
Volume Resistivity | 1000000000000000 | ohms·cm | ASTM D257 |
Dielectric Strength (at 0.0295 in) | 710 | V/mil | ASTM D149 |
Arc Resistance (at 0.0295 in) | PLC 5 | - | ASTM D495 |
Comparative Tracking Index (at 0.0295 in) | PLC 2 | - | UL 746 |
High Amp Arc Ignition (at 0.06 in) | PLC 0 | - | UL 746 |
High Amp Arc Ignition (at 0.12 in) | PLC 1 | - | UL 746 |
High Voltage Arc Tracking Rate (at 0.0295 in) | PLC 2 | - | UL 746 |
Hot Wire Ignition (at 0.06 in) | PLC 2 | - | UL 746 |
Hot Wire Ignition (at 0.12 in) | PLC 1 | - | UL 746 |
Value | Units | Test Method / Conditions | |
Flame Rating (at 0.06 in) | V-2 | - | UL 94 |
Flame Rating (at 0.12 in) | V-2 | - | UL 94 |
Value | Units | Test Method / Conditions | |
Drying Temperature | 245 - 255 | °F | - |
Drying Time | 3.0 - 4.0 | hr | - |
Front Temperature | 590 - 630 | °F | - |
Middle Temperature | 570 - 610 | °F | - |
Mold Temperature | 180 - 240 | °F | - |
Rear Temperature | 550 - 590 | °F | - |
Maximum Drying Time | 8 | hr | - |
Processing Temperature (Melt) | 600 - 650 | °F | - |
Value | Units | Test Method / Conditions | |
Impact Strength (at 73°F, 0.125 in, Notched Izod) | 17 | ft·lb/in | ASTM D256 |
Gardner Impact Strength (at 0.125 in) | min. 320 | in·lb | ASTM D3029 |
Value | Units | Test Method / Conditions | |
Rockwell Hardness (M-Scale) | 70 | - | ASTM D785 |
Rockwell Hardness (R-Scale) | 118 | - | ASTM D785 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Agency Ratings & Compliance
RoHS Compliant
Packaging & Availability
- Regional Availability
- Availability
North America