ProCoat® Splashdown™ Wood Sealer

Identification & Functionality

Product Type

1K (1 component) Coating,

Sealer,

Solventless & High Solids Coating

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Paints & Coatings

Primers & Sealers

Features & Benefits

Labeling Claims

Environmentally Friendly,

Low VOC

Ready-to-Use Product Features

Adhesion Modified,

Durable,

Excellent Flow Properties,

Excellent Leveling Properties,

Excellent Substrate Adhesion,

High Solids Content,

Low VOC,

Rapid Drying Properties

Product Features

• Easy Application.
• Fast Dry Time.
• Excellent Adhesion Properties.
• Excellent Flow & Leveling.
• Self-crosslinking.
• Environmentally Friendly.
• V.O.C. Compliant.

Applications & Uses

Markets

Building & Construction,

Paints & Coatings

Applications

Paints & Coatings — Building & Construction

Wood Coatings & Finishes

Building & Construction — Building Envelope & Roofing

Architectural Coatings

Building & Construction — Decorative Materials & Finishes

Decorative Paints, Coatings & Stains

Building & Construction — Flooring & Surfaces

Floor Coatings

Application Area

Ceramic Tiles

Application Method

Roller

Compatible Substrates & Surfaces

Wood

Clean Up

Water

Application Method

T-Bar, Roller, Trim Pad, Brush, Spray

Product Uses

• Ideal for wood flooring, cork, & resilient tile.
• Formulated for use on newly sanded domestic & exotic woods.
• Highly recommended for residential, commercial & sport applications.

Recommended Systems

Wood:

• Newly sanded floors: 1 coat ProCoat Splashdown Wood Sealer with 2 - 3 coats of H2Oil or 2-3 coats of AquaPro. When coating over stains allow stain to dry per manufacturer’s directions or longer depending on atmospheric conditions. A test area is recommended to insure compatibility with stain.
• Recoating existing surfaces: Abrade with appropriate screen or conditioning pad and apply 1 - 2 coats of H2Oil / AquaPro. When recoating existing surfaces compatibility must be determined by applicator.

Application Procedures

• Wood: Shake coating vigorously for 30 - 45 seconds and then let sit 10 to 15 minutes before applying. Pour a 6" to 8" wide line of finish along the starting wall. Follow the grain of the wood. Draw a clean, pre-dampened applicator forward. Following the grain of the wood, move the finish toward the opposite wall. Hold the applicator at a snowplow angle to maintain a wet edge at all times. (Maintain at least 3" wide wet edge at all times to ensure proper coverage rate.) To prevent lapping and dry marks make sure you’re using recommended coverage of 450 - 500 square foot per gallon. Do not spread too thin. When cutting in floor, never work more than five feet ahead of the person applying the finish. Allow your first coat to dry 2 to 4 hours before curing Radcoat with UV light. For smoothest results before applying final coat, buff with conditioning pad. Always vacuum and tack thoroughly with a slightly water dampened mop or cloth after abrading.
• Roller Application: The use of 10 mm or 3/8^th microfiber rollers are suggested. Applicator should evaluate the application and use the appropriate roller material and size determined by the porosity of the substrate being coated.

Properties

Odor

Mild, Non-Offensive

Typical Properties

	Value	Units	Test Method / Conditions
Solids Content	35.28 - 36.72	%	-
Volatile Organic Compounds	max. 150	g/l	-
Weight/Gallon	8.7	lbs/gal	-
Coefficient of Friction (SCOF)	0.84	-	-
Hardness	110.0	-	Konig
Taber Abrasion (CS17, 1000g, 1000c)	60.0	mg loss	-
Flash Point	200.0	°F	-
Dry Time (Between Coats)	1 - 2	hours	-
Coverage	400 - 500	sq.ft./gal	-

Storage & Handling

Shelf Life

1 Year, Un-opened Container