Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Properties
- Quick curing
- Zero shrinkage and almost odorless
- Completely solvent-free
- Color-fast (aliphatic) and UV proof
- Excellent preservation of color and gloss
- Completely water resistant
- For out- and indoor applications
- Very low dirt absorption
- Good chemical resistance
- Up to 3 times more wear and scratch resistant than traditional flooring systems
- Resistant against plasticizers
Applications & Uses
- Markets
- Application Area
- Uses
- The quick-curing time makes ProFast Flooring ideal for walkways, balconies, terraces and stairwells.
- It also can be used in warehouses, distribution centers and production facilities. Based on ProFast technology, decorative systems can be applied.
- Thermal
Load Dry heat Dry Heat Permanent 80ºC Brief (a maximum of 7 days) 100ºC Brief (a maximum of 132 hours) 120ºC
Short-term wet heat up to a maximum of +80 ºC and only occasionally, for instance when steam-cleaning. Simultaneous chemical and mechanical loads are not permitted.
- Application Information
- Method: Trowel, squeegee, roller or brush
- Usage: 0.15 - 0.30 kg/m²/layer; Surface dependent
- Processing temperature:
- Object: -10 and +30 ºC
- Product: +10 and +25 ºC
- Chemical resistant*: After 3 x 24 hours
- Mechanical resistant*: After 2 – 3 hours
- Dilution:
- ProFast thinner.
- A maximum of 5% only to be added once base(A) and hardener(B) have been mixed.
- Adding thinner can affect the curing times.
- Cleaning agent: Roca Cleaner R5518 (equipment)
- Hands: Swarfega Blackbox Cleaning wipes (They are also supplied by Prokol).
- * At 20 ºC and 65% RH surface.
- ** At 1 kg and 20 ºC product.
- Mixing Instruction
- 2-component products must always be mechanically mixed, preferably with a continuously adjustable mixing machine/drill (300 - 400 RPM) or another suitable mixer/whisk.
- As a guideline, the diameter of the mixer/whisk must be at least 1/3 of the diameter of the container in which the product is mixed in.
- First mix component A until it is a homogenous mixture.
- Add component B (completely drained or scraped) to component A and mix at least 2-3 minutes until it is a homogenous mixture.
- To exclude unmixed materials (bottom/sides) are processed, transfer the mixture to a clean mixing bucket/tub and mix again.
- When using additives such as quartz sand or the like, only add when the mixture is a homogenous mixture.
- After adding, please mix thoroughly again.
- When mixing parts, both components must be mixed separately and carefully and weighed accurately.
- Notes During Application
- 2-component products may only be applied when the relative humidity is less than 85%.
- The minimum surface temperature is +5°C and the temperature of the surface to be treated and the uncured product must be 3°C above the dew point.
- See the dew point table. The curing process occurs more quickly at higher temperatures and slower at lower temperatures.
- The potlife is partly dependent on the product temperature.
- Ensure good ventilation during curing. Insufficient ventilation, notably on the floors of swimming pools and other basins, bottoms of trailers, may result in slow and irregular curing of the applied primer layer.
- Entrapped solvent can lead to blistering and debonding of a subsequent layer.
- System Sheets
There are several smooth, decorative, and anti-slip systems composed based on ProFast products. Here for there are systems sheets available.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Adhesion Strength (Dry Mineral Surfaces) | min. 5.5 | MPa | - |
| Adhesion Strength (Moist Mineral Surfaces) | min. 2.2 | MPa | - |
| Density (Mixed Product) | 1.25 | kg/l | - |
| Finish | Gloss With a Slight Roll Effect | - | - |
| Mix Ratio | 1900-01-26 | g/g | - |
| Recoat Time (-10ºC) | 2.5 - 48 | hours | - |
| Recoat Time (0ºC) | 2 - 48 | hours | - |
| Recoat Time (10ºC) | 1.5 - 48 | hours | - |
| Recoat Time (20ºC) | 1 - 24 | hours | - |
| Recoat Time (25ºC) | 0.75 - 48 | minutes | - |
| Solids by Volume | 100.0 | % | - |
| Walkable After (-10ºC) | 2.5 | hours | - |
| Walkable After (0ºC) | 2.0 | hours | - |
| Walkable After (10ºC) | 1.5 | hours | - |
| Walkable After (20ºC) | 1.0 | hours | - |
| Walkable After (25ºC) | 45.0 | minutes | - |
| Wear Resistance Taber (1000omw., 1 Kg Load, CS17) | 80.0 | mg | - |
Packaging & Availability
- Availability
ProFast Flooring is also available as an anti-slip coating.
- Article Number and Packaging
- 16200-5: 5 kg set
- 16200-10: 10 kg set
Storage & Handling
- Shelf Life
At least 12 months after the date of production, if stored dry in unopened packaging and protected against frost.
- Pot Life
- At 15 ºC: approx. 35 minutes
- At 20 ºC: approx. 30 minutes
- At 25 ºC: approx. 25 minutes