Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Density | 0.065 | lbs/in³ | - |
Tensile Strength | 5,000 (3.5) | psi (kg/mm²) | - |
Flexural Strength | 8,000 (5.6) | psi (kg/mm²) | - |
Compression Strength | 15,000 (10.6) | psi (kg/mm²) | - |
Elastic Modulus | 1.4 (980) | Msi (kg/mm²) | - |
Thermal Expansion | 18×10⁻⁶ (32.4×10⁻⁶) | in/in/°F (cm/cm/°C) | - |
Dielectric Strength | min. 475 (min. 18.7) | V/Mil (KV/mm) | - |
Arc Resistance | 190 | seconds | - |
Dielectric Constant (at 60 Hz) | 5.2 | - | - |
Dissipation Factor (at 60 Hz) | 0.03 | - | - |
Volume Resistivity (at 77°F) | 1×10¹⁶ | ohm-cm | - |
Water Absorption | 0.0005 | - | - |
Heat Distortion Temperature | 220 (105) | °F (°C) | - |
Thermal Conductivity | 0.8 | W/(m⋅K) | - |
Outgassing (Total Mass Loss) | 0.0021 | - | - |
Outgassing (Collected Volatile Condensable Material) | 0.0001 | - | - |
Outgassing (Water Vapour Release) | 0.0011 | - | - |
Regulatory & Compliance
- Certifications & Compliance