Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Base Chemicals Features
- Features
- Hardenability - Atomet 4201, containing a precise level of manganese, nickel and molybdenum, is an ideal choice for powder metallurgy (PM) and powder forging (PF) applications that require consistent and superior heat-treated properties.
- Improves hardness and tensile strength.
- Dimensional change - Atomet 4201 can be used with existing tooling designed for conventional AISI 4200 pre-alloyed powders.
- No need to retool.
- Consistency - a stable ore base, modern steelmaking practices and statistically controlled powder manufacturing ensure lot-to-lot consistency. Being a homogeneous alloy, Atomet 4201 eliminates the detrimental effects of segregation and dusting normally associated with elemental blends.
- Low variation of part properties.
- Compatible with work environment requirements.
- Compressibility - the outstanding compressibility of Atomet 4201 extends the benefits of pre-alloyed powders thigh density applications above 6.9 g/cm3
- Reduces tool stress
- Improves strength
- Purity and cleanliness - state-of-the-art clean steel practice ensures low residuals and sets new standards for cleanliness.
- Improves mechanical and dynamic properties
- Hardenability - Atomet 4201, containing a precise level of manganese, nickel and molybdenum, is an ideal choice for powder metallurgy (PM) and powder forging (PF) applications that require consistent and superior heat-treated properties.
Applications & Uses
- Markets
Properties
- Physical Form
- Typical Properties
- Density*
Density measured in water.
Value | Units | Test Method / Conditions | |
Carbon | 0.004 | wt% | - |
Oxygen | 0.1 | wt% | - |
Sulfur | 0.009 | wt% | - |
Manganese | 0.28 | wt% | - |
Molybdenum | 0.6 | wt% | - |
Nickel | 0.45 | wt% | - |
Apparent Density | 2.92 | g/cm³ | - |
Flow | 26.0 | s/50g | - |
Density* (600MPa) | 7.05 | g/cm³ | - |
Technical Details & Test Data
- Particle Size Analysis
Particle Size Analysis, wt% U.S. Mesh
µm+60 +100 +325 -325 +250 +150 +45 -45 Trace 10 65 25