Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Easy to apply - Ready to Use.
- Does not require acid etching.
- Single component.
- Outstanding adhesion.
- Excellent resistance to weather and mechanical abuse.
- Excellent chemical and road salt resistance.
- No hot tire pickup.
- Self-leveling
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Typical Uses
DuraGrade Concrete Ultra Low VOC provides superior protection for both indoor and outdoor concrete surfaces. Typical applications include: garage floors, patios, basement, parking structures and more. Can be used with decorative flakes. Most garage projects can be completed with two coats in just one day. Anti-skid can be added for a slip resistant surface.
- Cure Times
Varies with relative humidity, temperature and thickness of film.
- Dry-to-Recoat: 2 to 6 hours
- Dry-to-Handle: 2 to 6 hours
- Full Cure: 72 hours
- Compatibility
With most other coatings; Always refer to the coating .manufacturers guidelines for application and compatibility
- Surface Preparation
The concrete substrate must be structurally sound and thoroughly clean and completely dry. Remove loose paint, moisture, dirt, mildew, oils, wax, loose particles, and other debris before coating. New concrete must be cured for at least 30-90 days depending on climate. Surfaces with tight existing paint or sealants or very smooth or power troweled should be sanded or ground. All repairs should be completed and allowed to fully cure prior to application. Be sure all repair materials are paintable. Adhesion and calcium chloride moisture tests should be performed and outstanding issues fixed prior to application.
- Application Methods
Brush, Roll, or Spray
Properties
- Color
- Finish
- Glossy
- Typical Properties
Value | Units | Test Method / Conditions | |
Weight per Gallon | 9.3 - 9.5 | lbs. | - |
Flash Point | 123.0 | °F | - |
Viscosity | 240 - 300 | cP | - |
Theoretical Coverage (Depending on Porosity of Concrete) | approx. 300 | ft²/gal | - |
Solids (By Volume) | 69.58 - 72.42 | % | - |
Recommended DFT | min. 6 | mil | - |
Recommended DFT (Commercial, Industrial or Marine Applications) | 12.0 | mil | - |
VOC Content | 49.0 | g/l | - |
Application Temperature | 35 - 110 | °F | - |
Technical Details & Test Data
- Testing
- Taber Abrasion (ASTM D4060): 38 mg / 1,000 Cycles
- Impact Resistance (ASTM D2794): >40 inches (exceeds max test limits)
- Mandrel Bend (ASTM D 522-13): >32% without cracking (exceeds test)
- Pull-off Adhesion Bond Strength (ASTM D7234-05):
- 50mm dolly: >525 PSI (Dollies unable to be removed at ~525 max psi)
- 20mm dolly: >1485 PSI (the concrete broke apart before DuraGrade lost adhesion)
Packaging & Availability
- Size Options
- Quart
- Gallon
- 5 Gallon Pail
Storage & Handling
- Shelf Life
Approx. 2 years un-opened; 1 month for opened containers; Up to 6 months if sealed with Bloxygen.