Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Properties
- Thermal Properties
- Electrical Properties
- Injection Molding
- Flame Characteristics
- Note
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Value | Units | Test Method / Conditions | |
Specific Gravity ¹¹ | 1.24 | — | ASTM D792 |
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹ | 0.3 | % | ASTM D570 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 174 | °C | ASTM D648 |
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹ | 0.000056 | 1/°C | ASTM D696 |
Value | Units | Test Method / Conditions | |
Dielectric Strength (at 1.6mm) ¹¹ | 130 | kV/mm | ASTM D149 |
Dissipation Factor (at at 1 MHz) ¹¹ | 0.006 | — | ASTM D150 |
Value | Units | Test Method / Conditions | |
Drying Temperature ⁷ | 120 - 150 | °C | — |
Drying Time ⁷ | 4 | Hrs | — |
Maximum Moisture Content ⁷ | 0.05 | % | — |
Melt Temperature ⁷ | 360 - 370 | °C | — |
Front - Zone 3 Temperature ⁷ | 350 - 360 | °C | — |
Middle - Zone 2 Temperature ⁷ | 340 - 350 | °C | — |
Rear - Zone 1 Temperature ⁷ | 325 - 340 | °C | — |
Mold Temperature ⁷ | 150 | °C | — |
Back Pressure ⁷ | 0.2 - 0.3 | MPa | — |
Screw Speed ⁷ | 30 - 60 | rpm | — |
Value | Units | Test Method / Conditions | |
Oxygen Index (LOI) | 26 | % | ASTM D2863 |
Packaging & Availability
- Regional Availability