LNP COLORCOMP™ Compound - JX09403J - SABIC's Specialty

Identification & Functionality

Chemical Family: Polysulfones
Polymer Name: Polyethersulfone (PES)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Labeling Claims: Food Contact Acceptable,
No Added PFAS
Materials Features: Excellent Aesthetics,
Food Contact Acceptable,
Good Aesthetics,
Good Surface Appearance,
High Temperature Resistance,
Low Extractables,
Low Leachable,
No Added PFAS,
Pigmentable,
Unreinforced,
Very Good Heat Resistance

Applications & Uses

Markets: Building & Construction,
Consumer Goods,
Electrical & Electronics,
Healthcare & Pharma,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Building & Construction — Building Materials
Pipes & Plumbing
Electrical & Electronics — Devices & Assemblies
Consumer Electronics
Healthcare & Pharma — Medical
Medical Devices & Assemblies,
Surgical Instruments & Trays
Printing & Packaging — Packaging
Food & Beverage Packaging,
Healthcare Packaging,
Industrial & Transport Packaging,
Non-Food Consumer Packaging
Plastics & Elastomers End Uses: Appliances,
Consumer Applications,
Food Packaging,
Home Appliances,
Hoses,
Medical Devices,
Medical Packaging,
Medical/Healthcare Applications,
Pharmaceutical Packaging,
Pipes,
Surgical Devices,
Water Management
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Color: Custom
Mechanical Properties
Physical Properties
Thermal Properties
Impact Properties
Injection Molding
Note: ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Modulus (at 50 mm/min) ¹¹	2690	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	88.9	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	6.5	%	ASTM D638
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2620	MPa	ASTM D790
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	125	MPa	ASTM D790

	Value	Units	Test Method / Conditions
Density ¹¹	1.37	g/cm³	ISO 1183
Specific Gravity ¹¹	1.37	-	ASTM D792

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	200	°C	ASTM D648

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	53	J/m	ASTM D256

Packaging & Availability

LNP™ COLORCOMP™ Compound JX09403J