Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers Processing Methods
- Processing Techniques
NTC 55 can be processed on any good PVC injection molding with a temperature range of 130ºC - 160ºC and preheating the same up to 70ºC is recommended to avoid moisture bubbles on end products.
- Spillage
Vacuum cleaning.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.2 | - | ASTM D 729 |
| Hardness | 56 | Shore A | ASTM D 2240 |
| Tensile Strength (Before Aging) | 10 | N/mm² | IS 10810 Part 7 |
| Elongation at Break (Before Aging) | 320 | % | IS 10810 Part 7 |
| Thermal Stability (199.5ºC - 200.5ºC) | min. 15 | minutes | IS 10810 Part 60 |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety
These PVC pellets do not undergo hazardous decomposition under normal storage conditions. Static charges may be generated by conveying PVC pellets and, therefore, the conveying systems should be properly grounded.
Packaging & Availability
- Packaging Type
Storage & Handling
- Package Storage & Handling
These PVC pellets should be packed in airtight laminated plastic bags of 25 Kg net weight and stored in a cool & dry place away from sunlight. Use of gloves and nose mask is recommended during manual handling.
- Disposal
Waste PVC pellets should be disposed in accordance with local regulations. The product is intended for industrial use only MSDS is available on request.