Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Composite Materials Functions
- Technologies
Features & Benefits
- Materials Features
- Features and Benefits
- High HDT
- High Molecular Weight
- High elongation
- Long term experience
- Excellent mechanical properties
- Excellent resistance to water ingress
- Excellent impact resistance
- Safety in use
Applications & Uses
- Markets
- Recommended Applications
CRYSTIC PD 10154I has been specially developed for UV curing systems and relining pipe repair industry.
- Formulation Guidelines
This Resin contains a photo-initiator and can be cured under UV light or LED exposure. For UV curing applications, a UV lamp of 400W Energy is recommended and the optimum wave length absorption is 370 nm.
Properties
- Typical Liquid Resin Properties
- Cured Properties
- Note
Test according to BS 2782 :1980
1MPa = 1MN/m2 = 1N/mm2 = 10,2 kgf/cm2
* cured 24 h at 20°C then 3 h à 80°C except for the HDT where the schedule was 24 h at 20°C then 5 h at 80°C then 3h at 100°C.
Value | Units | Test Method / Conditions | |
Viscosity (at 25°C, Rheomat 37,35s⁻¹) | 4 - 6 | dPa.s | - |
Specific Gravity | 1.1 | - | - |
Acid Index | 10 - 15 | mg KOH/g | - |
Solid Content (1H, at 150°C) | 53 - 57 | % | - |
Stability (with storage recommendations) | 9 | Months | - |
Value | Units | Test Method / Conditions | |
Barcol Hardness (GYZJ 934-1)* | 44 | - | - |
Heat Deflection Temperature (under load 1.8 MPa)* | 104 | °C | - |
Water Absorption (24h, at 23°C)* | 15 | mg | - |
Specific Gravity (at 20°C)* | 1.16 | - | - |
Elongation (at break)* | 2.1 | % | - |
Tensile Strength* | 60 | MPa | - |
Tensile Modulus* | 3700 | MPa | - |
Flexural Strength* | 130 | MPa | - |
Flexural Modulus* | 3600 | MPa | - |
Regulatory & Compliance
- Quality Standards
- Approvals
CRYSTIC PD 10154I is type 1140 according to German standard DIN 16946 Teil 2 and group 3 according to DIN 18820 Teil 1.
Technical Details & Test Data
- Additives
Since certain pigments, fillers or extra styrene may affect properties of CRYSTIC PD 10154I their effect should be evaluated before addition to the formulation.
Packaging & Availability
- Packaging Type
- Packaging
- Crystic® PD 10154I is supplied in 225 kg or 1100 kg containers. Bulk supplies can be delivered by road tanker
Storage & Handling
- Storage
- Crystic® PD 10154I should be stored in the dark, between 5°C and 25°C in the original, unopened container in a dry, well ventilated, place. Protect from freezing and direct sunlight. Avoid contact with oxidizing agents. If stored outside of these recommendations, shelf life will be significantly reduced.