Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Composite Materials Functions
- Technologies
Features & Benefits
- Materials Features
- Features and Benefits
Crystic VE 679-03PA has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.
Applications & Uses
- Applications
- Composites End Use
- Formulation Guidelines
Crystic VE 679-03PA must be thoroughly stirred and allowed to attain workshop temperature (18 °C – 20 °C) before use. It needs only the addition of a catalyst to start the curing reaction. The recommended catalyst is Trigonox 249, which should be added at 2 % into the resin.
- Applications
Crystic® VE 679-03PA is recommended for use as an infusion resin with a wide range of gel times with various catalysts.
Properties
- Color
- Cured Properties
- Uncured Properties
- Note
*Curing Schedule - 24 hours at 20°C, 16 hours at 40°C
**Curing Schedule - 24 hours at 20°C, 3 hours at 80°C
†Curing Schedule - 24 hours at 20°C, 5 hours at 80°C, 3 hours at 120°C
Value | Units | Test Method / Conditions | |
Deflection temperature (under load 1.80 MPa)† | 92 | ºC | BS or BS EN ISO test method |
Barcol Hardness* | 31 | - | BS or BS EN ISO test method |
Tensile Strength | 62 | MPa | BS or BS EN ISO test method |
Tensile Modulus* | 3.2 | GPa | BS or BS EN ISO test method |
Elongation (at break)* | 2.7 | % | BS or BS EN ISO test method |
Barcol Hardness** | 37 | - | BS or BS EN ISO test method |
Tensile Strength** | 68 | MPa | BS or BS EN ISO test method |
Tensile Modulus** | 3.5 | GPa | BS or BS EN ISO test method |
Elongation (at break)** | 2.2 | % | BS or BS EN ISO test method |
Value | Units | Test Method / Conditions | |
Viscosity (at 25°C, 4500 s⁻¹) | 1.9 | Poise | BS or BS EN ISO test method |
Specific Gravity (at 25°C) | 1.065 | - | BS or BS EN ISO test method |
Regulatory & Compliance
- Approvals
Crystic VE 679-03PA produced at Scott Bader’s Wollaston UK facility, is approved by Lloyd’s Register of Shipping for use in the construction of craft under their survey.
Technical Details & Test Data
- Additives
The addition of pigment, fillers or other additives may adversely affect the resin properties. Users should consult Scott Bader’s Technical Service Department before making any such additions.
- Recommended Testing
It is recommended that customers test Crystic® VE 679-03PA before use under their own conditions of application to ensure the required surface finish is achieved.
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging
- Crystic® VE 679-03PA can be supplied in 25kg, 200kg drums and 1100kg IBCs
Storage & Handling
- Shelf Life
- 6 Months
- Storage
Crystic® VE 679-03PA should be stored in its original container and out of direct sunlight. It is recommended that the storage temperature be less than 20°C where practical, but should not exceed 30°C. Ideally, containers should be opened only immediately prior to use. Shelf life from date of manufacture when stored in accordance with these recommendations is 6 months.
- Pot Life
Temperature Pot Life in Minutes Using 2% Trigonox 249 15°C 195 minutes 20°C 120 minutes 25°C 80 minutes The resin, mold and workshop should be at, or above, 15°C before curing is carried out.