Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Industrial Additives Functions
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Industrial Additives End Use
- Applications
TEXICRYL® 13-219 has been developed for use in surface bonding and through-bonding of synthetic fiber wadding. It will effectively prevent penetration of the fibers through the cover fabric, preserve the high loft of the wadding and facilitate handling during the making-up process. It has excellent heat and lightstability, as well as good wash and dry-clean solvent resistance.
Drying and Curing
- Cure of emulsion binders is dependent on the polymer type, catalyst concentration, temperature and time.
- TEXICRYL® 13-219 is supplied ready-catalyzed and, after drying, must be cured for 2-3 minutes at 140°C. It is recommended that synthetic fiber waddings processed with TEXICRYL® 13-219 be dried and cured in hot-air ovens with efficient air movement to ensure removal of water vapor during the drying phase.
- When dried and cured under these conditions, TEXICRYL® 13-219 will confer dry-clean resistance, washfastness and good recovery from compression. TEXICRYL® 13-219 has an indefinite pot life at normal spraybonding concentrations (10-25% solids content).
- TEXICRYL® 13-219 has a non-detectable formaldehyde level according to Oeko-Tex® testing, ISO 14184-1 2011.
Properties
- Physical Form
- Characteristics
- Note
*Determined by metal bar with temperature gradient.
Value | Units | Test Method / Conditions | |
Solid Content | 46 | % | - |
Viscosity (at 25°C, Brookfield RVT, Spindle 4, 100 rpm) | 200 | mPa.s | - |
Particle Size | 150 | nm | - |
Minimum Film Formation Temperature* | 15 | °C | - |
pH | 7 | - | - |
Glass Transition Temperature (Tg) | 30 | °C | - |
Regulatory & Compliance
- Quality Standards
Packaging & Availability
- Packaging Type
- Packaging Information
TEXICRYL® 13-219 is be supplied in drums or IBC’s (please check with your local representative). Bulk deliveries are by road tanker.
Storage & Handling
- Storage Conditions
TEXICRYL® 13-219 should be stored in the original, unopened and undamaged containers in a dry place at temperatures between 5°C and 30°C. Protect from freezing and direct sunlight.