Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Cleaning Ingredients Functions
- Fluids & Lubricants Functions
- Industrial Additives Functions
- Product Families
Features & Benefits
- Labeling Claims
- Fluids & Lubricants Features
- HII Features
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Compatible Substrates & Surfaces
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
Properties
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Solids Content | 38.0 - 42.0 | % | - |
| pH (as is) | 4.0 - 6.0 | - | - |
| Sodium Sulfate Content | max. 5 | % | - |
| Isopropanol Content | max. 5 | % | - |
| Free Peroxide Content | max. 0.10 | % | - |
| Cloud Point | approx. 15 | °C | - |
| Active Content | 40.0 | % | - |
| Reactive Volatile Organic Compounds | 5.0 | % | U.S. EPA |
Safety & Health
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace safety practices should be used to control these exposures.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage and Handling Conditions
- Handle BIO-TERGE® PAS-8S E with care; use away from sparks and open flame. Normal safety precautions (e.g. gloves and safety goggles) should be employed when handling BIO-TERGE® PAS-8S E. Use in well-ventilated area. Contact with eyes, nose or prolonged skin contact should be avoided. Wash thoroughly after handling material.
- Non-Bulk Storage Recommendations: It is recommended that BIO-TERGE® PAS-8S E be stored in sealed containers and kept in a cool, dry place. If it cools below the cloud point, the product will separate, and this product can crystallize under prolonged storage. When crystallisation occurs during storage, it is necessary to warm the drums up to 45°C-50°C (113°F-122°F) under stirring to rehomogenise it before use. After this operation the product can remain hazy, this is normal and does not affect its performance.
- Bulk Storage Recommendations: BIO-TERGE® PAS-8S E should be stored in vessels of 316 stainless steel or fiberglass with a corrosion liner. Material should be stored between 20°C-35°C (68°F-95°F). Mild agitation is recommended. Material is heat sensitive and agitation prevents localised heating. Stainless steel 316 is preferred for pumps, pipes and transfer lines.