Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
Features & Benefits
- Labeling Claims
- Agrochemicals Features
- Solution Advantages
- Excellent drift reduction and deposition
- Reduces driftable fines by producing the right sized droplets for application
- Modifies wetting and deposition characteristics
- Oil-based technology is unaffected by pump shearing
- Excellent compatibility with tank mix adjuvants
- Made from bio-renewable resources
- Works with a variety of nozzles
Applications & Uses
- Markets
- Application Technique
- Applications
STEPGROW DRTS is a unique adjuvant designed to reduce spray drift without adversely affecting agricultural tank mixtures.
Properties
- Physical Form
- Appearance
- Clear amber liquid (at 25°C)
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (at 25°C) | 0.92 | g/ml | - |
Flash Point | min. 94 | °C | PMCC Flash Point Tester |
Moisture Content | max. 1 | % | - |
pH (in 1% aqueous) | 5 | - | - |
Pour Point | -13 | °C | - |
Regulated Volatile Organic Chemicals | 0.8 | % | U.S. EPA |
Viscosity (at 25°C) | 60 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance
- Clearances
The international inventories country clearances of STEPGROW DRTS, can be found in Section 15 of the Safety Data Sheet (SDS). It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Technical Details & Test Data
- Test Data
-
Figure: PowerMAX® (Glyphosate @ 58 PSI)
Figure illustrates the strong performance by STEPGROW DRTS compared to a control group and leading competitive product in application testing using an AIXR nozzle.
Packaging & Availability
- Standard Packaging
STEPGROW DRTS is available in drums and in bulk quantities.
Storage & Handling
- Storage & Handling
- Normal safety precautions (e.g., gloves and safety goggles) should be employed when handling STEPGROW DRTS handling materials. Contact with eyes and prolonged contact with skin should be avoided. Wash thoroughly after handling materials. See SDS for more information.
- Bulk Storage Information: Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Ambient temperature of 77°F (25°C) is sufficient to maintain ease of pumping. The recommended storage temperature for STEPGROW DRTS is 50- 100°F (10-43°C).
- Non-Bulk Storage Information: STEPGROW DRTS which has been stored in drums at temperatures below 10°F (-13°C) may thicken or solidify. It may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace safety practices should be used to control these exposures. See SDS for more information.